Onderwerp: FreePBX : extension unavailable

Beste wht'ers,

Ik probeer al een tijdje een thuiscentrale op te zetten met wat extra features (testjes) en tot hier toe lukt dit aardig. Echter heb ik één probleem waar ik maar niet van af geraak...

Op dit moment zijn er 5 extensies:
- 1000 : Thuis Fax ATA (faxtoestel, aangesloten op een ATA)
- 1010 : Thuis Kris ATA (vaste telefoon van mezelf)
- 1011 : Kris GSM (SIP client op GSM : 3cx)
- 1020 : Thuis Isa ATA (vaste telefoon van vriendin)
- 1021 : Isa GSM (SIP client op GSM: 3cx)

Als we proberen intern te bellen naar elkaar, via welk toestel ook, lukt alles. De enige dwarsligger is extensie 1021 : daar krijg ik telkens "the person with extension 1021 is unavailable, please leave a message after the tone". Als ik op mijn GSM, pc (3cx) of ATA deze extensie registreer en er naar toe probeer te bellen krijg ik exact dezelfde boodschap. Hoewel ik er telkens voor zorg dat de extensie "online" is op de sipclient en dit dus in principe zou moeten werken. Grappig detail is wel dat zijzelf wel kan bellen naar de andere extensies met haar SIP client.

Heb al wat rondgezocht in freepbx maar ik vind nergens direct hoe ik dit issue kan oplossen of waar ik juist moet zoeken. Iemand van jullie die een idee heeft?

Alvast bedankt!

Heb je misschien op extensie 1021 een andere context ingevuld?

Anders moet je even asterisk in debug mode zetten.

Zo uit mijn hoofd:

asterisk -r
set sip debug on

Bij applications > extensions heb ik bij allen hetzelfde ingevuld (uiteraard met uitzondering van extensienummer, display name, SIP Alias, outbound CID (heeft ander DID nummer), en wachtwoord).

Als Asterisk in debug mode staat, waar kan ik dan het probleem (of liever : oplossing) vinden?
Niet echt superveel ervaring met freePBX, is dus ook even zoeken en doen...

doe eens
sip show peers

en laat even result zien.

Mogelijk een NAT error. dan krijg je ook die melding namelijk

Name/username Host Dyn Forcerport ACL Port Status

1001/1001 10.0.0.11 D A 5061 OK (16 ms)
1007 (Unspecified) D A 0 UNKNOWN

1010/1010 10.0.0.11 D A 5060 OK (18 ms)
1011 (Unspecified) D A 0 UNKNOWN

1020/1020 10.0.0.12 D A 5062 OK (28 ms)
1021 (Unspecified) D A 0 UNKNOWN

InternetCalls/xxxxxxxx 77.72.169.134 N 5060 OK (34 ms)
VoipTiger/xxxxxx 213.254.248.67 N 5060 Unmonitored
WeePee Trunk/xxxxxxxx 91.208.12.139 N 5060 OK (28 ms)
9 sip peers [Monitored: 5 online, 3 offline Unmonitored: 1 online, 0 offline]

Een NAT probleem zou mij bizar lijken. Als ik op haar SIP client de gegevens van bijvoorbeeld mijn extensie (1011) ingeef, dan werkt die daar perfect. Haar extensiegegevens ingeven op mijn SIP client of mijn ATA resulteert in eenzelfde foutmelding...

Voor alle duidelijkheid : in deze test waren extensies 1011 en 1021 niet aangesloten, enkel de ATA's. Test met 1011 en 1021 (sip clients) kan ik vanavond wel doen indien gewenst.

Extensie instellingen van de niet-werkende extensie (1021) en een wel-werkende extensie (1011).

1001/1001 10.0.0.11 D A 5061 OK (16 ms)
1007 (Unspecified) D A 0 UNKNOWN

1010/1010 10.0.0.11 D A 5060 OK (18 ms)
1011 (Unspecified) D A 0 UNKNOWN

1020/1020 10.0.0.12 D A 5062 OK (28 ms)
1021 (Unspecified) D A 0 UNKNOWN



1001 1010 en 1020 zijn hier online En deze kunnen onderling nu bellen of loopt het nu weer ergens mis?
omdat eerst 1021 het probleem was, maar die is dus duidelijk offline.



dus graag even aangeven welke extensie op dit moment niet gebelt kan worden.

als je daarna even asterisk -rvvvvvvvvvvvvvv doet en dan die extensie eens belt en de gehele output even kunt sturen dan komen we mogelijk een stuk verder (ps als je de output liever niet online wilt gooien kun je me die ook mailen naar nico @ flaxe . eu )

Hi Flaxi_eu!
Eerst en vooral : tnx voor je hulp!

De extensies 1010, 1011, en 1020 kunnen perfect onderling brengen. Indien één van deze extensies belt naar extensie 1021 dan krijgen deze de extension unavailable foutmelding. Echter kan deze extensie (1021) wel bellen naar één van de voorgaande 3 nummers, waarna een gewoon gesprek geen probleem is. Extensies 1007 is op dit moment niet aangesloten, dus deze foutmelding is normaal. Extensie 1011 is mijn GSM. Blijkbaar stond de SIP Client hiervan af tijdens mijn testen. Deze twee fouten zijn dus normaal.

Dit is even correcte output aldus
v01*CLI> sip show peers
Name/username Host Dyn Forcerport ACL Port Status
1001/1001 10.0.0.11 D A 5061 OK (14 ms)
1007 (Unspecified) D A 0 UNKNOWN
1010/1010 10.0.0.11 D A 5060 OK (13 ms)
1011/1011 178.145.246.116 D A 41514 OK (79 ms)
1020/1020 10.0.0.12 D A 5062 OK (20 ms)
1021/1021 100.97.201.221 D A 41816 UNREACHABLE
InternetCalls/xxx 77.72.169.129 N 5060 OK (33 ms)
WeePee Trunk/xxxx 91.208.12.139 N 5060 OK (27 ms)

Het commando "asterisk -rvvvvvvvvvvvvvv" werkt niet, kan dit?

Als ik vanaf extensie 1010 bel naar extensie 1021 krijg ik het volgende te zien...

== Using SIP VIDEO TOS bits 136
== Using SIP VIDEO CoS mark 6
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [1021@from-internal:1] Set("SIP/1010-000000a8", "__RINGTIMER=15") in new stack
-- Executing [1021@from-internal:2] Macro("SIP/1010-000000a8", "exten-vm,1021,1021,0,0,0") in new stack
-- Executing [s@macro-exten-vm:1] Macro("SIP/1010-000000a8", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1010-000000a8", "AMPUSER=1010") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1010-000000a8", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/1010-000000a8", "1?Set(REALCALLERIDNUM=1010)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/1010-000000a8", "AMPUSER=1010") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/1010-000000a8", "AMPUSERCIDNAME=Thuis Kris ATA") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/1010-000000a8", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/1010-000000a8", "AMPUSERCID=1010") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/1010-000000a8", "CALLERID(all)="Thuis Kris ATA" <1010>") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("SIP/1010-000000a8", "0?limit") in new stack
-- Executing [s@macro-user-callerid:10] ExecIf("SIP/1010-000000a8", "0?Set(GROUP(concurrency_limit)=1010)") in new stack
-- Executing [s@macro-user-callerid:11] ExecIf("SIP/1010-000000a8", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:12] GosubIf("SIP/1010-000000a8", "7?sub-ccss,s,1(macro-exten-vm,1021)") in new stack
-- Executing [s@sub-ccss:1] ExecIf("SIP/1010-000000a8", "0?Return()") in new stack
-- Executing [s@sub-ccss:2] Set("SIP/1010-000000a8", "CCSS_SETUP=TRUE") in new stack
-- Executing [s@sub-ccss:3] GosubIf("SIP/1010-000000a8", "0?monitor_config,1(macro-exten-vm,1021):monitor_default,1(macro-exten-vm,1021)") in new stack
-- Executing [monitor_default@sub-ccss:1] GotoIf("SIP/1010-000000a8", "1?is_exten") in new stack
-- Goto (sub-ccss,monitor_default,4)
-- Executing [monitor_default@sub-ccss:4] Set("SIP/1010-000000a8", "CALLCOMPLETION(cc_monitor_policy)=generic") in new stack
-- Executing [monitor_default@sub-ccss:5] Set("SIP/1010-000000a8", "CALLCOMPLETION(cc_max_monitors)=5") in new stack
-- Executing [monitor_default@sub-ccss:6] Return("SIP/1010-000000a8", "TRUE") in new stack
-- Executing [s@sub-ccss:4] GosubIf("SIP/1010-000000a8", "7?agent_config,1():agent_default,1()") in new stack
-- Executing [agent_config@sub-ccss:1] Set("SIP/1010-000000a8", "CALLCOMPLETION(cc_agent_policy)=generic") in new stack
-- Executing [agent_config@sub-ccss:2] Set("SIP/1010-000000a8", "CALLCOMPLETION(cc_offer_timer)=30") in new stack
-- Executing [agent_config@sub-ccss:3] Set("SIP/1010-000000a8", "CALLCOMPLETION(ccbs_available_timer)=") in new stack
-- Executing [agent_config@sub-ccss:4] Set("SIP/1010-000000a8", "CALLCOMPLETION(ccnr_available_timer)=") in new stack
-- Executing [agent_config@sub-ccss:5] Set("SIP/1010-000000a8", "CALLCOMPLETION(cc_callback_macro)=ccss-default") in new stack
-- Executing [agent_config@sub-ccss:6] ExecIf("SIP/1010-000000a8", "1?Set(CALLCOMPLETION(cc_recall_timer)=)") in new stack
-- Executing [agent_config@sub-ccss:7] ExecIf("SIP/1010-000000a8", "1?Set(CALLCOMPLETION(cc_max_agents)=)") in new stack
-- Executing [agent_config@sub-ccss:8] ExecIf("SIP/1010-000000a8", "0?Set(CALLCOMPLETION(cc_agent_dialstring)=Loc al/1010_1021@from-ccss-)") in new stack
-- Executing [agent_config@sub-ccss:9] Set("SIP/1010-000000a8", "CALLCOMPLETION(cc_callback_macro)=ccss-default") in new stack
-- Executing [agent_config@sub-ccss:10] Return("SIP/1010-000000a8", "") in new stack
-- Executing [s@sub-ccss:5] Set("SIP/1010-000000a8", "DB(AMPUSER/1010/ccss/last_number)=1021") in new stack
-- Executing [s@sub-ccss:6] Return("SIP/1010-000000a8", "") in new stack
-- Executing [s@macro-user-callerid:13] GotoIf("SIP/1010-000000a8", "0?continue") in new stack
-- Executing [s@macro-user-callerid:14] Set("SIP/1010-000000a8", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:15] GotoIf("SIP/1010-000000a8", "1?continue") in new stack
-- Goto (macro-user-callerid,s,26)
-- Executing [s@macro-user-callerid:26] Set("SIP/1010-000000a8", "CALLERID(number)=1010") in new stack
-- Executing [s@macro-user-callerid:27] Set("SIP/1010-000000a8", "CALLERID(name)=Thuis Kris ATA") in new stack
-- Executing [s@macro-user-callerid:28] Set("SIP/1010-000000a8", "CHANNEL(language)=nl") in new stack
-- Executing [s@macro-exten-vm:2] Set("SIP/1010-000000a8", "RingGroupMethod=none") in new stack
-- Executing [s@macro-exten-vm:3] Set("SIP/1010-000000a8", "__EXTTOCALL=1021") in new stack
-- Executing [s@macro-exten-vm:4] Set("SIP/1010-000000a8", "__PICKUPMARK=1021") in new stack
-- Executing [s@macro-exten-vm:5] Set("SIP/1010-000000a8", "RT=15") in new stack
-- Executing [s@macro-exten-vm:6] Gosub("SIP/1010-000000a8", "sub-record-check,s,1(exten,1021,)") in new stack
-- Executing [s@sub-record-check:1] GotoIf("SIP/1010-000000a8", "1?check") in new stack
-- Goto (sub-record-check,s,6)
-- Executing [s@sub-record-check:6] Set("SIP/1010-000000a8", "__MON_FMT=wav") in new stack
-- Executing [s@sub-record-check:7] GotoIf("SIP/1010-000000a8", "1?next") in new stack
-- Goto (sub-record-check,s,10)
-- Executing [s@sub-record-check:10] ExecIf("SIP/1010-000000a8", "0?Return()") in new stack
-- Executing [s@sub-record-check:11] GotoIf("SIP/1010-000000a8", "0?exten,1") in new stack
-- Executing [s@sub-record-check:12] Set("SIP/1010-000000a8", "__REC_STATUS=INITIALIZED") in new stack
-- Executing [s@sub-record-check:13] ExecIf("SIP/1010-000000a8", "0?Set(__REC_POLICY_MODE=)") in new stack
-- Executing [s@sub-record-check:14] Set("SIP/1010-000000a8", "NOW=1364905654") in new stack
-- Executing [s@sub-record-check:15] Set("SIP/1010-000000a8", "__DAY=02") in new stack
-- Executing [s@sub-record-check:16] Set("SIP/1010-000000a8", "__MONTH=04") in new stack
-- Executing [s@sub-record-check:17] Set("SIP/1010-000000a8", "__YEAR=2013") in new stack
-- Executing [s@sub-record-check:18] Set("SIP/1010-000000a8", "__TIMESTR=20130402-142734") in new stack
-- Executing [s@sub-record-check:19] Set("SIP/1010-000000a8", "__FROMEXTEN=1010") in new stack
-- Executing [s@sub-record-check:20] Set("SIP/1010-000000a8", "__CALLFILENAME=exten-1021-1010-20130402-142734-1364905654.168") in new stack
-- Executing [s@sub-record-check:21] Goto("SIP/1010-000000a8", "exten,1") in new stack
-- Goto (sub-record-check,exten,1)
-- Executing [exten@sub-record-check:1] GotoIf("SIP/1010-000000a8", "0?callee") in new stack
-- Executing [exten@sub-record-check:2] Set("SIP/1010-000000a8", "__REC_POLICY_MODE=never") in new stack
-- Executing [exten@sub-record-check:3] GotoIf("SIP/1010-000000a8", "0?caller") in new stack
-- Executing [exten@sub-record-check:4] GotoIf("SIP/1010-000000a8", "0?callee") in new stack
-- Executing [exten@sub-record-check:5] ExecIf("SIP/1010-000000a8", "2?Set(CALLER_PRI=10):Set(CALLER_PRI=0)") in new stack
-- Executing [exten@sub-record-check:6] ExecIf("SIP/1010-000000a8", "2?Set(CALLEE_PRI=10):Set(CALLEE_PRI=0)") in new stack
-- Executing [exten@sub-record-check:7] GotoIf("SIP/1010-000000a8", "1?caller:callee") in new stack
-- Goto (sub-record-check,exten,10)
-- Executing [exten@sub-record-check:10] Set("SIP/1010-000000a8", "__REC_POLICY_MODE=never") in new stack
-- Executing [exten@sub-record-check:11] GosubIf("SIP/1010-000000a8", "0?record,1(exten,1021,1010)") in new stack
-- Executing [exten@sub-record-check:12] Return("SIP/1010-000000a8", "") in new stack
-- Executing [s@macro-exten-vm:7] GotoIf("SIP/1010-000000a8", "1?macrodial") in new stack
-- Goto (macro-exten-vm,s,13)
-- Executing [s@macro-exten-vm:13] GosubIf("SIP/1010-000000a8", "0?clrheader,1()") in new stack
-- Executing [s@macro-exten-vm:14] Macro("SIP/1010-000000a8", "dial-one,15,tr,1021") in new stack
-- Executing [s@macro-dial-one:1] Set("SIP/1010-000000a8", "DEXTEN=1021") in new stack
-- Executing [s@macro-dial-one:2] Set("SIP/1010-000000a8", "DIALSTATUS_CW=") in new stack
-- Executing [s@macro-dial-one:3] GosubIf("SIP/1010-000000a8", "0?screen,1()") in new stack
-- Executing [s@macro-dial-one:4] GosubIf("SIP/1010-000000a8", "0?cf,1()") in new stack
-- Executing [s@macro-dial-one:5] GotoIf("SIP/1010-000000a8", "1?skip1") in new stack
-- Goto (macro-dial-one,s,8)
-- Executing [s@macro-dial-one:8] GotoIf("SIP/1010-000000a8", "0?nodial") in new stack
-- Executing [s@macro-dial-one:9] GotoIf("SIP/1010-000000a8", "0?continue") in new stack
-- Executing [s@macro-dial-one:10] Set("SIP/1010-000000a8", "EXTHASCW=ENABLED") in new stack
-- Executing [s@macro-dial-one:11] GotoIf("SIP/1010-000000a8", "0?next1:cwinusebusy") in new stack
-- Goto (macro-dial-one,s,23)
-- Executing [s@macro-dial-one:23] GotoIf("SIP/1010-000000a8", "1?next3:continue") in new stack
-- Goto (macro-dial-one,s,24)
-- Executing [s@macro-dial-one:24] ExecIf("SIP/1010-000000a8", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
-- Executing [s@macro-dial-one:25] GotoIf("SIP/1010-000000a8", "0?nodial") in new stack
-- Executing [s@macro-dial-one:26] GosubIf("SIP/1010-000000a8", "1?dstring,1():dlocal,1()") in new stack
-- Executing [dstring@macro-dial-one:1] Set("SIP/1010-000000a8", "DSTRING=") in new stack
-- Executing [dstring@macro-dial-one:2] Set("SIP/1010-000000a8", "DEVICES=1021") in new stack
-- Executing [dstring@macro-dial-one:3] ExecIf("SIP/1010-000000a8", "0?Return()") in new stack
-- Executing [dstring@macro-dial-one:4] ExecIf("SIP/1010-000000a8", "0?Set(DEVICES=021)") in new stack
-- Executing [dstring@macro-dial-one:5] Set("SIP/1010-000000a8", "LOOPCNT=1") in new stack
-- Executing [dstring@macro-dial-one:6] Set("SIP/1010-000000a8", "ITER=1") in new stack
-- Executing [dstring@macro-dial-one:7] Set("SIP/1010-000000a8", "THISDIAL=SIP/1021") in new stack
-- Executing [dstring@macro-dial-one:8] GosubIf("SIP/1010-000000a8", "1?zap2dahdi,1()") in new stack
-- Executing [zap2dahdi@macro-dial-one:1] ExecIf("SIP/1010-000000a8", "0?Return()") in new stack
-- Executing [zap2dahdi@macro-dial-one:2] Set("SIP/1010-000000a8", "NEWDIAL=") in new stack
-- Executing [zap2dahdi@macro-dial-one:3] Set("SIP/1010-000000a8", "LOOPCNT2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:4] Set("SIP/1010-000000a8", "ITER2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:5] Set("SIP/1010-000000a8", "THISPART2=SIP/1021") in new stack
-- Executing [zap2dahdi@macro-dial-one:6] ExecIf("SIP/1010-000000a8", "0?Set(THISPART2=DAHDI/1021)") in new stack
-- Executing [zap2dahdi@macro-dial-one:7] Set("SIP/1010-000000a8", "NEWDIAL=SIP/1021&") in new stack
-- Executing [zap2dahdi@macro-dial-one:8] Set("SIP/1010-000000a8", "ITER2=2") in new stack
-- Executing [zap2dahdi@macro-dial-one:9] GotoIf("SIP/1010-000000a8", "0?begin2") in new stack
-- Executing [zap2dahdi@macro-dial-one:10] Set("SIP/1010-000000a8", "THISDIAL=SIP/1021") in new stack
-- Executing [zap2dahdi@macro-dial-one:11] Return("SIP/1010-000000a8", "") in new stack
-- Executing [dstring@macro-dial-one:9] Set("SIP/1010-000000a8", "DSTRING=SIP/1021&") in new stack
-- Executing [dstring@macro-dial-one:10] Set("SIP/1010-000000a8", "ITER=2") in new stack
-- Executing [dstring@macro-dial-one:11] GotoIf("SIP/1010-000000a8", "0?begin") in new stack
-- Executing [dstring@macro-dial-one:12] Set("SIP/1010-000000a8", "DSTRING=SIP/1021") in new stack
-- Executing [dstring@macro-dial-one:13] Return("SIP/1010-000000a8", "") in new stack
-- Executing [s@macro-dial-one:27] GotoIf("SIP/1010-000000a8", "0?nodial") in new stack
-- Executing [s@macro-dial-one:28] GotoIf("SIP/1010-000000a8", "0?skiptrace") in new stack
-- Executing [s@macro-dial-one:29] GosubIf("SIP/1010-000000a8", "1?ctset,1():ctclear,1()") in new stack
-- Executing [ctset@macro-dial-one:1] Set("SIP/1010-000000a8", "DB(CALLTRACE/1021)=1010") in new stack
-- Executing [ctset@macro-dial-one:2] Return("SIP/1010-000000a8", "") in new stack
-- Executing [s@macro-dial-one:30] Set("SIP/1010-000000a8", "D_OPTIONS=tr") in new stack
-- Executing [s@macro-dial-one:31] ExecIf("SIP/1010-000000a8", "0?SIPAddHeader(Alert-Info: )") in new stack
-- Executing [s@macro-dial-one:32] ExecIf("SIP/1010-000000a8", "0?SIPAddHeader()") in new stack
-- Executing [s@macro-dial-one:33] ExecIf("SIP/1010-000000a8", "0?Set(CHANNEL(musicclass)=)") in new stack
-- Executing [s@macro-dial-one:34] GosubIf("SIP/1010-000000a8", "0?qwait,1()") in new stack
-- Executing [s@macro-dial-one:35] Set("SIP/1010-000000a8", "__CWIGNORE=") in new stack
-- Executing [s@macro-dial-one:36] Set("SIP/1010-000000a8", "__KEEPCID=TRUE") in new stack
-- Executing [s@macro-dial-one:37] GotoIf("SIP/1010-000000a8", "0?usegoto,1") in new stack
-- Executing [s@macro-dial-one:38] GotoIf("SIP/1010-000000a8", "0?godial") in new stack
-- Executing [s@macro-dial-one:39] Set("SIP/1010-000000a8", "CONNECTEDLINE(name,i)=GSM Isa") in new stack
-- Executing [s@macro-dial-one:40] Set("SIP/1010-000000a8", "CONNECTEDLINE(num)=1021") in new stack
-- Executing [s@macro-dial-one:41] Set("SIP/1010-000000a8", "D_OPTIONS=trI") in new stack
-- Executing [s@macro-dial-one:42] Dial("SIP/1010-000000a8", "SIP/1021,15,trI") in new stack
[2013-04-02 14:27:34] WARNING[5636]: app_dial.c:2345 dial_exec_full: Unable to create channel of type 'SIP' (cause 20 - Subscriber absent)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dial-one:43] ExecIf("SIP/1010-000000a8", "0?Set(DIALSTATUS=)") in new stack
-- Executing [s@macro-dial-one:44] GosubIf("SIP/1010-000000a8", "0?s-CHANUNAVAIL,1()") in new stack
-- Executing [s@macro-dial-one:45] MacroExit("SIP/1010-000000a8", "") in new stack
-- Executing [s@macro-exten-vm:15] Set("SIP/1010-000000a8", "SV_DIALSTATUS=CHANUNAVAIL") in new stack
-- Executing [s@macro-exten-vm:16] GosubIf("SIP/1010-000000a8", "0?docfu,1()") in new stack
-- Executing [s@macro-exten-vm:17] GosubIf("SIP/1010-000000a8", "0?docfb,1()") in new stack
-- Executing [s@macro-exten-vm:18] Set("SIP/1010-000000a8", "DIALSTATUS=CHANUNAVAIL") in new stack
-- Executing [s@macro-exten-vm:19] ExecIf("SIP/1010-000000a8", "0?MacroExit()") in new stack
-- Executing [s@macro-exten-vm:20] GotoIf("SIP/1010-000000a8", "0?s-CHANUNAVAIL,1") in new stack
-- Executing [s@macro-exten-vm:21] Macro("SIP/1010-000000a8", "vm,1021,CHANUNAVAIL,") in new stack
-- Executing [s@macro-vm:1] Macro("SIP/1010-000000a8", "user-callerid,SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1010-000000a8", "AMPUSER=1010") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1010-000000a8", "14?report") in new stack
-- Goto (macro-user-callerid,s,13)
-- Executing [s@macro-user-callerid:13] GotoIf("SIP/1010-000000a8", "1?continue") in new stack
-- Goto (macro-user-callerid,s,26)
-- Executing [s@macro-user-callerid:26] Set("SIP/1010-000000a8", "CALLERID(number)=1010") in new stack
-- Executing [s@macro-user-callerid:27] Set("SIP/1010-000000a8", "CALLERID(name)=Thuis Kris ATA") in new stack
-- Executing [s@macro-user-callerid:28] Set("SIP/1010-000000a8", "CHANNEL(language)=nl") in new stack
-- Executing [s@macro-vm:2] Set("SIP/1010-000000a8", "VMGAIN=""") in new stack
-- Executing [s@macro-vm:3] Macro("SIP/1010-000000a8", "blkvm-check,") in new stack
-- Executing [s@macro-blkvm-check:1] Set("SIP/1010-000000a8", "GOSUB_RETVAL=") in new stack
-- Executing [s@macro-blkvm-check:2] ExecIf("SIP/1010-000000a8", "0?Set(GOSUB_RETVAL=TRUE)") in new stack
-- Executing [s@macro-blkvm-check:3] MacroExit("SIP/1010-000000a8", "") in new stack
-- Executing [s@macro-vm:4] GotoIf("SIP/1010-000000a8", "1?vmx,1") in new stack
-- Goto (macro-vm,vmx,1)
-- Executing [vmx@macro-vm:1] Set("SIP/1010-000000a8", "MEXTEN=1021") in new stack
-- Executing [vmx@macro-vm:2] Set("SIP/1010-000000a8", "MMODE=CHANUNAVAIL") in new stack
-- Executing [vmx@macro-vm:3] Set("SIP/1010-000000a8", "RETVM=") in new stack
-- Executing [vmx@macro-vm:4] Set("SIP/1010-000000a8", "MODE=unavail") in new stack
-- Executing [vmx@macro-vm:5] GotoIf("SIP/1010-000000a8", "1?chknomsg") in new stack
-- Goto (macro-vm,vmx,8)
-- Executing [vmx@macro-vm:8] GotoIf("SIP/1010-000000a8", "0?s-CHANUNAVAIL,1") in new stack
-- Executing [vmx@macro-vm:9] GotoIf("SIP/1010-000000a8", "1?notdirect") in new stack
-- Goto (macro-vm,vmx,11)
-- Executing [vmx@macro-vm:11] NoOp("SIP/1010-000000a8", "Checking if ext 1021 is enabled: ") in new stack
-- Executing [vmx@macro-vm:12] GotoIf("SIP/1010-000000a8", "1?s-CHANUNAVAIL,1") in new stack
-- Goto (macro-vm,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-vm:1] Macro("SIP/1010-000000a8", "get-vmcontext,1021") in new stack
-- Executing [s@macro-get-vmcontext:1] Set("SIP/1010-000000a8", "VMCONTEXT=default") in new stack
-- Executing [s@macro-get-vmcontext:2] GotoIf("SIP/1010-000000a8", "0?200:300") in new stack
-- Goto (macro-get-vmcontext,s,300)
-- Executing [s@macro-get-vmcontext:300] NoOp("SIP/1010-000000a8", "") in new stack
-- Executing [s-CHANUNAVAIL@macro-vm:2] VoiceMail("SIP/1010-000000a8", "1021@default,u""") in new stack
-- <SIP/1010-000000a8> Playing 'vm-theperson.ulaw' (language 'nl')
-- <SIP/1010-000000a8> Playing 'digits/1.ulaw' (language 'nl')
-- <SIP/1010-000000a8> Playing 'digits/0.ulaw' (language 'nl')
-- <SIP/1010-000000a8> Playing 'digits/2.ulaw' (language 'nl')
-- <SIP/1010-000000a8> Playing 'digits/1.ulaw' (language 'nl')
-- <SIP/1010-000000a8> Playing 'vm-isunavail.ulaw' (language 'nl')
-- <SIP/1010-000000a8> Playing 'vm-intro.ulaw' (language 'nl')
-- <SIP/1010-000000a8> Playing 'beep.ulaw' (language 'nl')
-- Recording the message
-- x=0, open writing: /var/spool/asterisk/voicemail/default/1021/tmp/SBBkas format: wav, 0xb6812858
-- User hung up
== Parsing '/var/spool/asterisk/voicemail/default/1021/INBOX/msg0001.txt': == Found
== Spawn extension (macro-vm, s-CHANUNAVAIL, 2) exited non-zero on 'SIP/1010-000000a8' in macro 'vm'
== Spawn extension (macro-exten-vm, s, 21) exited non-zero on 'SIP/1010-000000a8' in macro 'exten-vm'
== Spawn extension (from-internal, 1021, 2) exited non-zero on 'SIP/1010-000000a8'
-- Executing [h@from-internal:1] Hangup("SIP/1010-000000a8", "") in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1010-000000a8'

Ik heb net gepoogd - op aanraden van een ander forum - om de Qualify eens uit te zetten. In plaats van meteen het "unavailable" bericht, krijg ik nu enkele beltonen en dan het "unavailable" bericht. Vriendin is echter nu op werk (dwz : GSM staat op "stil") dus wat dit aan haar kant geeft kan ik niet zeggen. In elk geval kan dit misschien de oplossing zijn! Vanavond bekijk ik het verder (als vriendin @home is).


Setting to yes (equivalent to 2000 msec) will send an OPTIONS packet to the endpoint periodically (default every minute). Used to monitor the health of the endpoint. If delays are longer then the qualify time, the endpoint will be taken offline and considered unreachable. Can be set to a value which is the msec threshhold. Setting to no will turn this off. Can also be helpful to keep NAT pinholes open.


Connected to Asterisk 1.8.20.1 currently running on v01 (pid = 1360)
Verbosity is at least 3
== Using SIP VIDEO TOS bits 136
== Using SIP VIDEO CoS mark 6
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [1021@from-internal:1] Set("SIP/1010-000000b2", "__RINGTIMER=15") in new stack
-- Executing [1021@from-internal:2] Macro("SIP/1010-000000b2", "exten-vm,1021,1021,0,0,0") in new stack
-- Executing [s@macro-exten-vm:1] Macro("SIP/1010-000000b2", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1010-000000b2", "AMPUSER=1010") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1010-000000b2", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/1010-000000b2", "1?Set(REALCALLERIDNUM=1010)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/1010-000000b2", "AMPUSER=1010") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/1010-000000b2", "AMPUSERCIDNAME=Thuis Kris ATA") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/1010-000000b2", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/1010-000000b2", "AMPUSERCID=1010") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/1010-000000b2", "CALLERID(all)="Thuis Kris ATA" <1010>") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("SIP/1010-000000b2", "0?limit") in new stack
-- Executing [s@macro-user-callerid:10] ExecIf("SIP/1010-000000b2", "0?Set(GROUP(concurrency_limit)=1010)") in new stack
-- Executing [s@macro-user-callerid:11] ExecIf("SIP/1010-000000b2", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:12] GosubIf("SIP/1010-000000b2", "7?sub-ccss,s,1(macro-exten-vm,1021)") in new stack
-- Executing [s@sub-ccss:1] ExecIf("SIP/1010-000000b2", "0?Return()") in new stack
-- Executing [s@sub-ccss:2] Set("SIP/1010-000000b2", "CCSS_SETUP=TRUE") in new stack
-- Executing [s@sub-ccss:3] GosubIf("SIP/1010-000000b2", "0?monitor_config,1(macro-exten-vm,1021):monitor_default,1(macro-exten-vm,1021)") in new stack
-- Executing [monitor_default@sub-ccss:1] GotoIf("SIP/1010-000000b2", "1?is_exten") in new stack
-- Goto (sub-ccss,monitor_default,4)
-- Executing [monitor_default@sub-ccss:4] Set("SIP/1010-000000b2", "CALLCOMPLETION(cc_monitor_policy)=generic") in new stack
-- Executing [monitor_default@sub-ccss:5] Set("SIP/1010-000000b2", "CALLCOMPLETION(cc_max_monitors)=5") in new stack
-- Executing [monitor_default@sub-ccss:6] Return("SIP/1010-000000b2", "TRUE") in new stack
-- Executing [s@sub-ccss:4] GosubIf("SIP/1010-000000b2", "7?agent_config,1():agent_default,1()") in new stack
-- Executing [agent_config@sub-ccss:1] Set("SIP/1010-000000b2", "CALLCOMPLETION(cc_agent_policy)=generic") in new stack
-- Executing [agent_config@sub-ccss:2] Set("SIP/1010-000000b2", "CALLCOMPLETION(cc_offer_timer)=30") in new stack
-- Executing [agent_config@sub-ccss:3] Set("SIP/1010-000000b2", "CALLCOMPLETION(ccbs_available_timer)=") in new stack
-- Executing [agent_config@sub-ccss:4] Set("SIP/1010-000000b2", "CALLCOMPLETION(ccnr_available_timer)=") in new stack
-- Executing [agent_config@sub-ccss:5] Set("SIP/1010-000000b2", "CALLCOMPLETION(cc_callback_macro)=ccss-default") in new stack
-- Executing [agent_config@sub-ccss:6] ExecIf("SIP/1010-000000b2", "1?Set(CALLCOMPLETION(cc_recall_timer)=)") in new stack
-- Executing [agent_config@sub-ccss:7] ExecIf("SIP/1010-000000b2", "1?Set(CALLCOMPLETION(cc_max_agents)=)") in new stack
-- Executing [agent_config@sub-ccss:8] ExecIf("SIP/1010-000000b2", "0?Set(CALLCOMPLETION(cc_agent_dialstring)=Loc al/1010_1021@from-ccss-)") in new stack
-- Executing [agent_config@sub-ccss:9] Set("SIP/1010-000000b2", "CALLCOMPLETION(cc_callback_macro)=ccss-default") in new stack
-- Executing [agent_config@sub-ccss:10] Return("SIP/1010-000000b2", "") in new stack
-- Executing [s@sub-ccss:5] Set("SIP/1010-000000b2", "DB(AMPUSER/1010/ccss/last_number)=1021") in new stack
-- Executing [s@sub-ccss:6] Return("SIP/1010-000000b2", "") in new stack
-- Executing [s@macro-user-callerid:13] GotoIf("SIP/1010-000000b2", "0?continue") in new stack
-- Executing [s@macro-user-callerid:14] Set("SIP/1010-000000b2", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:15] GotoIf("SIP/1010-000000b2", "1?continue") in new stack
-- Goto (macro-user-callerid,s,26)
-- Executing [s@macro-user-callerid:26] Set("SIP/1010-000000b2", "CALLERID(number)=1010") in new stack
-- Executing [s@macro-user-callerid:27] Set("SIP/1010-000000b2", "CALLERID(name)=Thuis Kris ATA") in new stack
-- Executing [s@macro-user-callerid:28] Set("SIP/1010-000000b2", "CHANNEL(language)=nl") in new stack
-- Executing [s@macro-exten-vm:2] Set("SIP/1010-000000b2", "RingGroupMethod=none") in new stack
-- Executing [s@macro-exten-vm:3] Set("SIP/1010-000000b2", "__EXTTOCALL=1021") in new stack
-- Executing [s@macro-exten-vm:4] Set("SIP/1010-000000b2", "__PICKUPMARK=1021") in new stack
-- Executing [s@macro-exten-vm:5] Set("SIP/1010-000000b2", "RT=15") in new stack
-- Executing [s@macro-exten-vm:6] Gosub("SIP/1010-000000b2", "sub-record-check,s,1(exten,1021,)") in new stack
-- Executing [s@sub-record-check:1] GotoIf("SIP/1010-000000b2", "1?check") in new stack
-- Goto (sub-record-check,s,6)
-- Executing [s@sub-record-check:6] Set("SIP/1010-000000b2", "__MON_FMT=wav") in new stack
-- Executing [s@sub-record-check:7] GotoIf("SIP/1010-000000b2", "1?next") in new stack
-- Goto (sub-record-check,s,10)
-- Executing [s@sub-record-check:10] ExecIf("SIP/1010-000000b2", "0?Return()") in new stack
-- Executing [s@sub-record-check:11] GotoIf("SIP/1010-000000b2", "0?exten,1") in new stack
-- Executing [s@sub-record-check:12] Set("SIP/1010-000000b2", "__REC_STATUS=INITIALIZED") in new stack
-- Executing [s@sub-record-check:13] ExecIf("SIP/1010-000000b2", "0?Set(__REC_POLICY_MODE=)") in new stack
-- Executing [s@sub-record-check:14] Set("SIP/1010-000000b2", "NOW=1364907204") in new stack
-- Executing [s@sub-record-check:15] Set("SIP/1010-000000b2", "__DAY=02") in new stack
-- Executing [s@sub-record-check:16] Set("SIP/1010-000000b2", "__MONTH=04") in new stack
-- Executing [s@sub-record-check:17] Set("SIP/1010-000000b2", "__YEAR=2013") in new stack
-- Executing [s@sub-record-check:18] Set("SIP/1010-000000b2", "__TIMESTR=20130402-145324") in new stack
-- Executing [s@sub-record-check:19] Set("SIP/1010-000000b2", "__FROMEXTEN=1010") in new stack
-- Executing [s@sub-record-check:20] Set("SIP/1010-000000b2", "__CALLFILENAME=exten-1021-1010-20130402-145324-1364907204.178") in new stack
-- Executing [s@sub-record-check:21] Goto("SIP/1010-000000b2", "exten,1") in new stack
-- Goto (sub-record-check,exten,1)
-- Executing [exten@sub-record-check:1] GotoIf("SIP/1010-000000b2", "0?callee") in new stack
-- Executing [exten@sub-record-check:2] Set("SIP/1010-000000b2", "__REC_POLICY_MODE=never") in new stack
-- Executing [exten@sub-record-check:3] GotoIf("SIP/1010-000000b2", "0?caller") in new stack
-- Executing [exten@sub-record-check:4] GotoIf("SIP/1010-000000b2", "0?callee") in new stack
-- Executing [exten@sub-record-check:5] ExecIf("SIP/1010-000000b2", "2?Set(CALLER_PRI=10):Set(CALLER_PRI=0)") in new stack
-- Executing [exten@sub-record-check:6] ExecIf("SIP/1010-000000b2", "2?Set(CALLEE_PRI=10):Set(CALLEE_PRI=0)") in new stack
-- Executing [exten@sub-record-check:7] GotoIf("SIP/1010-000000b2", "1?caller:callee") in new stack
-- Goto (sub-record-check,exten,10)
-- Executing [exten@sub-record-check:10] Set("SIP/1010-000000b2", "__REC_POLICY_MODE=never") in new stack
-- Executing [exten@sub-record-check:11] GosubIf("SIP/1010-000000b2", "0?record,1(exten,1021,1010)") in new stack
-- Executing [exten@sub-record-check:12] Return("SIP/1010-000000b2", "") in new stack
-- Executing [s@macro-exten-vm:7] GotoIf("SIP/1010-000000b2", "1?macrodial") in new stack
-- Goto (macro-exten-vm,s,13)
-- Executing [s@macro-exten-vm:13] GosubIf("SIP/1010-000000b2", "0?clrheader,1()") in new stack
-- Executing [s@macro-exten-vm:14] Macro("SIP/1010-000000b2", "dial-one,15,tr,1021") in new stack
-- Executing [s@macro-dial-one:1] Set("SIP/1010-000000b2", "DEXTEN=1021") in new stack
-- Executing [s@macro-dial-one:2] Set("SIP/1010-000000b2", "DIALSTATUS_CW=") in new stack
-- Executing [s@macro-dial-one:3] GosubIf("SIP/1010-000000b2", "0?screen,1()") in new stack
-- Executing [s@macro-dial-one:4] GosubIf("SIP/1010-000000b2", "0?cf,1()") in new stack
-- Executing [s@macro-dial-one:5] GotoIf("SIP/1010-000000b2", "1?skip1") in new stack
-- Goto (macro-dial-one,s,8)
-- Executing [s@macro-dial-one:8] GotoIf("SIP/1010-000000b2", "0?nodial") in new stack
-- Executing [s@macro-dial-one:9] GotoIf("SIP/1010-000000b2", "0?continue") in new stack
-- Executing [s@macro-dial-one:10] Set("SIP/1010-000000b2", "EXTHASCW=ENABLED") in new stack
-- Executing [s@macro-dial-one:11] GotoIf("SIP/1010-000000b2", "0?next1:cwinusebusy") in new stack
-- Goto (macro-dial-one,s,23)
-- Executing [s@macro-dial-one:23] GotoIf("SIP/1010-000000b2", "1?next3:continue") in new stack
-- Goto (macro-dial-one,s,24)
-- Executing [s@macro-dial-one:24] ExecIf("SIP/1010-000000b2", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
-- Executing [s@macro-dial-one:25] GotoIf("SIP/1010-000000b2", "0?nodial") in new stack
-- Executing [s@macro-dial-one:26] GosubIf("SIP/1010-000000b2", "1?dstring,1():dlocal,1()") in new stack
-- Executing [dstring@macro-dial-one:1] Set("SIP/1010-000000b2", "DSTRING=") in new stack
-- Executing [dstring@macro-dial-one:2] Set("SIP/1010-000000b2", "DEVICES=1021") in new stack
-- Executing [dstring@macro-dial-one:3] ExecIf("SIP/1010-000000b2", "0?Return()") in new stack
-- Executing [dstring@macro-dial-one:4] ExecIf("SIP/1010-000000b2", "0?Set(DEVICES=021)") in new stack
-- Executing [dstring@macro-dial-one:5] Set("SIP/1010-000000b2", "LOOPCNT=1") in new stack
-- Executing [dstring@macro-dial-one:6] Set("SIP/1010-000000b2", "ITER=1") in new stack
-- Executing [dstring@macro-dial-one:7] Set("SIP/1010-000000b2", "THISDIAL=SIP/1021") in new stack
-- Executing [dstring@macro-dial-one:8] GosubIf("SIP/1010-000000b2", "1?zap2dahdi,1()") in new stack
-- Executing [zap2dahdi@macro-dial-one:1] ExecIf("SIP/1010-000000b2", "0?Return()") in new stack
-- Executing [zap2dahdi@macro-dial-one:2] Set("SIP/1010-000000b2", "NEWDIAL=") in new stack
-- Executing [zap2dahdi@macro-dial-one:3] Set("SIP/1010-000000b2", "LOOPCNT2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:4] Set("SIP/1010-000000b2", "ITER2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:5] Set("SIP/1010-000000b2", "THISPART2=SIP/1021") in new stack
-- Executing [zap2dahdi@macro-dial-one:6] ExecIf("SIP/1010-000000b2", "0?Set(THISPART2=DAHDI/1021)") in new stack
-- Executing [zap2dahdi@macro-dial-one:7] Set("SIP/1010-000000b2", "NEWDIAL=SIP/1021&") in new stack
-- Executing [zap2dahdi@macro-dial-one:8] Set("SIP/1010-000000b2", "ITER2=2") in new stack
-- Executing [zap2dahdi@macro-dial-one:9] GotoIf("SIP/1010-000000b2", "0?begin2") in new stack
-- Executing [zap2dahdi@macro-dial-one:10] Set("SIP/1010-000000b2", "THISDIAL=SIP/1021") in new stack
-- Executing [zap2dahdi@macro-dial-one:11] Return("SIP/1010-000000b2", "") in new stack
-- Executing [dstring@macro-dial-one:9] Set("SIP/1010-000000b2", "DSTRING=SIP/1021&") in new stack
-- Executing [dstring@macro-dial-one:10] Set("SIP/1010-000000b2", "ITER=2") in new stack
-- Executing [dstring@macro-dial-one:11] GotoIf("SIP/1010-000000b2", "0?begin") in new stack
-- Executing [dstring@macro-dial-one:12] Set("SIP/1010-000000b2", "DSTRING=SIP/1021") in new stack
-- Executing [dstring@macro-dial-one:13] Return("SIP/1010-000000b2", "") in new stack
-- Executing [s@macro-dial-one:27] GotoIf("SIP/1010-000000b2", "0?nodial") in new stack
-- Executing [s@macro-dial-one:28] GotoIf("SIP/1010-000000b2", "0?skiptrace") in new stack
-- Executing [s@macro-dial-one:29] GosubIf("SIP/1010-000000b2", "1?ctset,1():ctclear,1()") in new stack
-- Executing [ctset@macro-dial-one:1] Set("SIP/1010-000000b2", "DB(CALLTRACE/1021)=1010") in new stack
-- Executing [ctset@macro-dial-one:2] Return("SIP/1010-000000b2", "") in new stack
-- Executing [s@macro-dial-one:30] Set("SIP/1010-000000b2", "D_OPTIONS=tr") in new stack
-- Executing [s@macro-dial-one:31] ExecIf("SIP/1010-000000b2", "0?SIPAddHeader(Alert-Info: )") in new stack
-- Executing [s@macro-dial-one:32] ExecIf("SIP/1010-000000b2", "0?SIPAddHeader()") in new stack
-- Executing [s@macro-dial-one:33] ExecIf("SIP/1010-000000b2", "0?Set(CHANNEL(musicclass)=)") in new stack
-- Executing [s@macro-dial-one:34] GosubIf("SIP/1010-000000b2", "0?qwait,1()") in new stack
-- Executing [s@macro-dial-one:35] Set("SIP/1010-000000b2", "__CWIGNORE=") in new stack
-- Executing [s@macro-dial-one:36] Set("SIP/1010-000000b2", "__KEEPCID=TRUE") in new stack
-- Executing [s@macro-dial-one:37] GotoIf("SIP/1010-000000b2", "0?usegoto,1") in new stack
-- Executing [s@macro-dial-one:38] GotoIf("SIP/1010-000000b2", "0?godial") in new stack
-- Executing [s@macro-dial-one:39] Set("SIP/1010-000000b2", "CONNECTEDLINE(name,i)=GSM Isa") in new stack
-- Executing [s@macro-dial-one:40] Set("SIP/1010-000000b2", "CONNECTEDLINE(num)=1021") in new stack
-- Executing [s@macro-dial-one:41] Set("SIP/1010-000000b2", "D_OPTIONS=trI") in new stack
-- Executing [s@macro-dial-one:42] Dial("SIP/1010-000000b2", "SIP/1021,15,trI") in new stack
== Using SIP VIDEO TOS bits 136
== Using SIP VIDEO CoS mark 6
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called SIP/1021
-- Connected line update to SIP/1010-000000b2 prevented.
-- SIP/1021-000000b3 is ringing
-- SIP/1021-000000b3 is ringing
-- SIP/1021-000000b3 is ringing
-- Nobody picked up in 15000 ms
-- Executing [s@macro-dial-one:43] ExecIf("SIP/1010-000000b2", "0?Set(DIALSTATUS=)") in new stack
-- Executing [s@macro-dial-one:44] GosubIf("SIP/1010-000000b2", "0?s-NOANSWER,1()") in new stack
-- Executing [s@macro-dial-one:45] MacroExit("SIP/1010-000000b2", "") in new stack
-- Executing [s@macro-exten-vm:15] Set("SIP/1010-000000b2", "SV_DIALSTATUS=NOANSWER") in new stack
-- Executing [s@macro-exten-vm:16] GosubIf("SIP/1010-000000b2", "0?docfu,1()") in new stack
-- Executing [s@macro-exten-vm:17] GosubIf("SIP/1010-000000b2", "0?docfb,1()") in new stack
-- Executing [s@macro-exten-vm:18] Set("SIP/1010-000000b2", "DIALSTATUS=NOANSWER") in new stack
-- Executing [s@macro-exten-vm:19] ExecIf("SIP/1010-000000b2", "0?MacroExit()") in new stack
-- Executing [s@macro-exten-vm:20] GotoIf("SIP/1010-000000b2", "0?s-NOANSWER,1") in new stack
-- Executing [s@macro-exten-vm:21] Macro("SIP/1010-000000b2", "vm,1021,NOANSWER,") in new stack
-- Executing [s@macro-vm:1] Macro("SIP/1010-000000b2", "user-callerid,SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1010-000000b2", "AMPUSER=1010") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1010-000000b2", "14?report") in new stack
-- Goto (macro-user-callerid,s,13)
-- Executing [s@macro-user-callerid:13] GotoIf("SIP/1010-000000b2", "1?continue") in new stack
-- Goto (macro-user-callerid,s,26)
-- Executing [s@macro-user-callerid:26] Set("SIP/1010-000000b2", "CALLERID(number)=1010") in new stack
-- Executing [s@macro-user-callerid:27] Set("SIP/1010-000000b2", "CALLERID(name)=Thuis Kris ATA") in new stack
-- Executing [s@macro-user-callerid:28] Set("SIP/1010-000000b2", "CHANNEL(language)=nl") in new stack
-- Executing [s@macro-vm:2] Set("SIP/1010-000000b2", "VMGAIN=""") in new stack
-- Executing [s@macro-vm:3] Macro("SIP/1010-000000b2", "blkvm-check,") in new stack
-- Executing [s@macro-blkvm-check:1] Set("SIP/1010-000000b2", "GOSUB_RETVAL=") in new stack
-- Executing [s@macro-blkvm-check:2] ExecIf("SIP/1010-000000b2", "0?Set(GOSUB_RETVAL=TRUE)") in new stack
-- Executing [s@macro-blkvm-check:3] MacroExit("SIP/1010-000000b2", "") in new stack
-- Executing [s@macro-vm:4] GotoIf("SIP/1010-000000b2", "1?vmx,1") in new stack
-- Goto (macro-vm,vmx,1)
-- Executing [vmx@macro-vm:1] Set("SIP/1010-000000b2", "MEXTEN=1021") in new stack
-- Executing [vmx@macro-vm:2] Set("SIP/1010-000000b2", "MMODE=NOANSWER") in new stack
-- Executing [vmx@macro-vm:3] Set("SIP/1010-000000b2", "RETVM=") in new stack
-- Executing [vmx@macro-vm:4] Set("SIP/1010-000000b2", "MODE=unavail") in new stack
-- Executing [vmx@macro-vm:5] GotoIf("SIP/1010-000000b2", "1?chknomsg") in new stack
-- Goto (macro-vm,vmx,8)
-- Executing [vmx@macro-vm:8] GotoIf("SIP/1010-000000b2", "0?s-NOANSWER,1") in new stack
-- Executing [vmx@macro-vm:9] GotoIf("SIP/1010-000000b2", "1?notdirect") in new stack
-- Goto (macro-vm,vmx,11)
-- Executing [vmx@macro-vm:11] NoOp("SIP/1010-000000b2", "Checking if ext 1021 is enabled: ") in new stack
-- Executing [vmx@macro-vm:12] GotoIf("SIP/1010-000000b2", "1?s-NOANSWER,1") in new stack
-- Goto (macro-vm,s-NOANSWER,1)
-- Executing [s-NOANSWER@macro-vm:1] Macro("SIP/1010-000000b2", "get-vmcontext,1021") in new stack
-- Executing [s@macro-get-vmcontext:1] Set("SIP/1010-000000b2", "VMCONTEXT=default") in new stack
-- Executing [s@macro-get-vmcontext:2] GotoIf("SIP/1010-000000b2", "0?200:300") in new stack
-- Goto (macro-get-vmcontext,s,300)
-- Executing [s@macro-get-vmcontext:300] NoOp("SIP/1010-000000b2", "") in new stack
-- Executing [s-NOANSWER@macro-vm:2] VoiceMail("SIP/1010-000000b2", "1021@default,u""") in new stack
-- <SIP/1010-000000b2> Playing 'vm-theperson.ulaw' (language 'nl')
-- <SIP/1010-000000b2> Playing 'digits/1.ulaw' (language 'nl')
-- <SIP/1010-000000b2> Playing 'digits/0.ulaw' (language 'nl')
-- <SIP/1010-000000b2> Playing 'digits/2.ulaw' (language 'nl')
-- <SIP/1010-000000b2> Playing 'digits/1.ulaw' (language 'nl')
-- <SIP/1010-000000b2> Playing 'vm-isunavail.ulaw' (language 'nl')
-- <SIP/1010-000000b2> Playing 'vm-intro.ulaw' (language 'nl')
-- <SIP/1010-000000b2> Playing 'beep.ulaw' (language 'nl')
-- Recording the message
-- x=0, open writing: /var/spool/asterisk/voicemail/default/1021/tmp/DJjBBW format: wav, 0xb68b0370
-- User hung up
== Parsing '/var/spool/asterisk/voicemail/default/1021/INBOX/msg0002.txt': == Found
== Spawn extension (macro-vm, s-NOANSWER, 2) exited non-zero on 'SIP/1010-000000b2' in macro 'vm'
== Spawn extension (macro-exten-vm, s, 21) exited non-zero on 'SIP/1010-000000b2' in macro 'exten-vm'
== Spawn extension (from-internal, 1021, 2) exited non-zero on 'SIP/1010-000000b2'
-- Executing [h@from-internal:1] Hangup("SIP/1010-000000b2", "") in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1010-000000b2'

even zonder al te veel lezen:

1021/1021 100.97.201.221 D A 41816 UNREACHABLE

ip 100.97.201.221
dat lijkt me geen intern ip.

melding is ook dat deze niet bereikbaar is.

zet nat aan voor deze extention. en zorg dat zowel je asterisk en je router de nat poorten doet forwarden

zolang je hier UNREACHABLE op krijgt met sip show peers gaat deze nooit correct werken. in of uitgaande gesprekken gaan ergens mis of worden na 10 tot 30 sec verbroken.

dus even een todo

Enable nat in asterisk (zorg voor de juiste nat ip's en port range
Enable nat in de extention
Open port range in je asterisk firewall (iptables)
Forward portrange (udp) van je router naar je asterisk box.

Zoals je kan zien is een andere extensie (1011/1011 178.145.246.116 D A 41514 OK (79 ms)) ook extern (mijn SIP client op mijn gsm) en deze werkt perfect. Terwijl deze exact dezelfde instellingen heeft als extensie 1021 (die fout gaat). NAT forwarding is niet nodig : ik heb thuis een /26 iprange (die direct bereikbaar zijn).

Mogelijk is dit iets.

100.64 is geen public ip

http://en.wikipedia.org/wiki/Reserved_IP_addresses

Used for communications between a Service Provider and its subscribers when using a Carrier-grade NAT, as specified by RFC 6598.

Denk dat het daar mis op gaat.

Mogelijk op de client eens via een stun server verbinden.

Damn...daar had ik nu eens totaal niet aan gedacht :s Vanavond eens proberen als de vriendin thuis is.
Wel grappig detail : vriendin en ikzelf hebben beide dezelfde GSM, zitten bij dezelfde provider (Proximus), hetzelfde abonnement, zelfde SIP client, hetzelfde ingesteld...en dan blijkt dit alsnog roet in het eten te gooien!

Ik probeer vanavond die STUN server in orde te brengen en hou je op de hoogte!

ok good luck

Guess twice...it work!!! *sigh*
STUN server toegevoegd op de SIP en het werkt plots prima.