Niet naar buiten kunnen bellen (VoipBuster)

**TiMMiEJ** · 17/07/08 23:00

Nu ik eindelijk gebeld kan worden via ISDN zit ik met het volgende probleem. Ik wil natuurlijk ook graag kunnen bellen en dat wil ik kunnen doen met mijn VoipBuster account.

Ik heb een trunk ingesteld met de volgende settings (gevonden op internet):

Code:

allow=alaw&ulaw&gsm
bindaddr=0.0.0.0
canreinvite=no
context=default
disallow=all
dtmfmode=inband
fromdomain=sip.voipbuster.com
fromuser=ServeXS
host=sip.voipbuster.com
insecure=very
nat=yes
port=5060
progressinband=yes
qualify=yes
secret=xxxx
srvlookup=yes
type=friend
username=ServeXS

Register string:

Code:

ServeXS:xxxx@sip.voipbuster.com

Ik heb een outbound route aangemaakt. Ik heb nu de volgende peers:

Code:

trixbox*CLI> sip show peers
Name/username              Host            Dyn Nat ACL Port     Status          
VoipBuster.com/ServeXS     194.120.0.198        N      5060     OK (45 ms)      
201/201                    192.168.1.69     D   N      55680    OK (101 ms)     
2 sip peers [Monitored: 2 online, 0 offline Unmonitored: 0 online, 0 offline]

Maar als ik naar buiten probeer te bellen krijg ik te horen dat de service niet beschikbaar is. Asterisk geeft het volgende weer in de console:

Code:

    -- Executing [00641111063@from-internal:1] Macro("SIP/201-0976acc0", "user-callerid|SKIPTTL|") in new stack
    -- Executing [s@macro-user-callerid:1] NoOp("SIP/201-0976acc0", "user-callerid: device 201") in new stack
    -- Executing [s@macro-user-callerid:2] Set("SIP/201-0976acc0", "AMPUSER=201") in new stack
    -- Executing [s@macro-user-callerid:3] GotoIf("SIP/201-0976acc0", "0?report") in new stack
    -- Executing [s@macro-user-callerid:4] ExecIf("SIP/201-0976acc0", "1|Set|REALCALLERIDNUM=201") in new stack
    -- Executing [s@macro-user-callerid:5] NoOp("SIP/201-0976acc0", "REALCALLERIDNUM is 201") in new stack
    -- Executing [s@macro-user-callerid:6] Set("SIP/201-0976acc0", "AMPUSER=201") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SIP/201-0976acc0", "AMPUSERCIDNAME=test") in new stack
    -- Executing [s@macro-user-callerid:8] GotoIf("SIP/201-0976acc0", "0?report") in new stack
    -- Executing [s@macro-user-callerid:9] Set("SIP/201-0976acc0", "AMPUSERCID=201") in new stack
    -- Executing [s@macro-user-callerid:10] Set("SIP/201-0976acc0", "CALLERID(all)="test" <201>") in new stack
    -- Executing [s@macro-user-callerid:11] Set("SIP/201-0976acc0", "REALCALLERIDNUM=201") in new stack
    -- Executing [s@macro-user-callerid:12] ExecIf("SIP/201-0976acc0", "0|Set|CHANNEL(language)=") in new stack
    -- Executing [s@macro-user-callerid:13] NoOp("SIP/201-0976acc0", "TTL:  ARG1: SKIPTTL") in new stack
    -- Executing [s@macro-user-callerid:14] GotoIf("SIP/201-0976acc0", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,23)
    -- Executing [s@macro-user-callerid:23] NoOp("SIP/201-0976acc0", "Using CallerID "test" <201>") in new stack
    -- Executing [00641111063@from-internal:2] Set("SIP/201-0976acc0", "_NODEST=") in new stack
    -- Executing [00641111063@from-internal:3] Macro("SIP/201-0976acc0", "record-enable|201|OUT|") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/201-0976acc0", "0?2:4") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] AGI("SIP/201-0976acc0", "recordingcheck|20080717-200119|1216328479.74") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
  recordingcheck|20080717-200119|1216328479.74: Outbound recording not enabled
    -- AGI Script recordingcheck completed, returning 0
    -- Executing [s@macro-record-enable:5] NoOp("SIP/201-0976acc0", "No recording needed") in new stack
    -- Executing [00641111063@from-internal:4] Macro("SIP/201-0976acc0", "dialout-trunk|3|0641111063||") in new stack
    -- Executing [s@macro-dialout-trunk:1] Set("SIP/201-0976acc0", "DIAL_TRUNK=3") in new stack
    -- Executing [s@macro-dialout-trunk:2] ExecIf("SIP/201-0976acc0", "0|Authenticate|") in new stack
    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/201-0976acc0", "0?disabletrunk|1") in new stack
    -- Executing [s@macro-dialout-trunk:4] Set("SIP/201-0976acc0", "DIAL_NUMBER=0641111063") in new stack
    -- Executing [s@macro-dialout-trunk:5] Set("SIP/201-0976acc0", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:6] Set("SIP/201-0976acc0", "GROUP()=OUT_3") in new stack
    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/201-0976acc0", "1?nomax") in new stack
    -- Goto (macro-dialout-trunk,s,9)
    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/201-0976acc0", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:10] Set("SIP/201-0976acc0", "DIAL_TRUNK_OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/201-0976acc0", "outbound-callerid|3") in new stack
    -- Executing [s@macro-outbound-callerid:1] GotoIf("SIP/201-0976acc0", "1?start") in new stack
    -- Goto (macro-outbound-callerid,s,3)
    -- Executing [s@macro-outbound-callerid:3] NoOp("SIP/201-0976acc0", "REALCALLERIDNUM is 201") in new stack
    -- Executing [s@macro-outbound-callerid:4] GotoIf("SIP/201-0976acc0", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,9)
    -- Executing [s@macro-outbound-callerid:9] Set("SIP/201-0976acc0", "USEROUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:10] Set("SIP/201-0976acc0", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:11] Set("SIP/201-0976acc0", "TRUNKOUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:12] GotoIf("SIP/201-0976acc0", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,16)
    -- Executing [s@macro-outbound-callerid:16] GotoIf("SIP/201-0976acc0", "1?usercid") in new stack
    -- Goto (macro-outbound-callerid,s,18)
    -- Executing [s@macro-outbound-callerid:18] GotoIf("SIP/201-0976acc0", "1?report") in new stack
    -- Goto (macro-outbound-callerid,s,22)
    -- Executing [s@macro-outbound-callerid:22] NoOp("SIP/201-0976acc0", "CallerID set to "test" <201>") in new stack
    -- Executing [s@macro-dialout-trunk:12] AGI("SIP/201-0976acc0", "fixlocalprefix") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
    -- AGI Script fixlocalprefix completed, returning 0
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/201-0976acc0", "OUTNUM=0641111063") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/201-0976acc0", "custom=SIP/VoipBuster.com") in new stack
    -- Executing [s@macro-dialout-trunk:15] GotoIf("SIP/201-0976acc0", "1?gocall") in new stack
    -- Goto (macro-dialout-trunk,s,17)
    -- Executing [s@macro-dialout-trunk:17] Macro("SIP/201-0976acc0", "dialout-trunk-predial-hook|") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/201-0976acc0", "0?bypass|1") in new stack
    -- Executing [s@macro-dialout-trunk:19] GotoIf("SIP/201-0976acc0", "0?customtrunk") in new stack
    -- Executing [s@macro-dialout-trunk:20] Dial("SIP/201-0976acc0", "SIP/VoipBuster.com/0641111063|300|") in new stack
    -- Couldn't call VoipBuster.com/0641111063
  == Everyone is busy/congested at this time (0:0/0/0)
    -- Executing [s@macro-dialout-trunk:21] Goto("SIP/201-0976acc0", "s-CHANUNAVAIL|1") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/201-0976acc0", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/201-0976acc0", "TRUNK Dial failed due to CHANUNAVAIL - failing through to other trunks") in new stack
    -- Executing [00641111063@from-internal:5] Macro("SIP/201-0976acc0", "outisbusy|") in new stack
    -- Executing [s@macro-outisbusy:1] Playback("SIP/201-0976acc0", "all-circuits-busy-now|noanswer") in new stack
    -- <SIP/201-0976acc0> Playing 'all-circuits-busy-now' (language 'en')
    -- Executing [s@macro-outisbusy:2] Playback("SIP/201-0976acc0", "pls-try-call-later|noanswer") in new stack
    -- <SIP/201-0976acc0> Playing 'pls-try-call-later' (language 'en')
    -- Executing [s@macro-outisbusy:3] Macro("SIP/201-0976acc0", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/201-0976acc0", "w") in new stack
    -- Executing [s@macro-hangupcall:2] NoCDR("SIP/201-0976acc0", "") in new stack
    -- Executing [s@macro-hangupcall:3] GotoIf("SIP/201-0976acc0", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing [s@macro-hangupcall:6] GotoIf("SIP/201-0976acc0", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] GotoIf("SIP/201-0976acc0", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,11)
    -- Executing [s@macro-hangupcall:11] Hangup("SIP/201-0976acc0", "") in new stack
  == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/201-0976acc0' in macro 'hangupcall'
  == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/201-0976acc0' in macro 'outisbusy'
  == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/201-0976acc0'

EDIT:

Ik heb mijn config een beetje aangepast:

Code:

type=peer
host=sip1.voipbuster.com
username=ServeXS
secret=xxxx
notransfer=yes
insecure=very
externip=xx.xx.xx.xx
context=voipbuster-out

En nu zie ik het volgende in de console:

Code:

 -- Called VoipBuster.com/641111063
    -- SIP/VoipBuster.com-09745248 is making progress passing it to SIP/201-09770bd0

Ik krijg echter de melding dat het nummer niet klopt. Zodra ik 0031 ervoor zet dan krijg ik weer de melding dat alles bezet is?

**TiMMiEJ** · 18/07/08 03:47

Probleem is opgelost, mijn dial pattern was niet helemaal juist.

Onderwerp Gereedschap

Toon

Onderwerp: Niet naar buiten kunnen bellen (VoipBuster)

Niet naar buiten kunnen bellen (VoipBuster)

Webhostingtalk.nl

Link met ons

Partners

Contact