Asterisk@home IVR Probleem

**jinxedworld** · 26/01/06 18:30

Ik ben bezig om via VoipBuster mijn Asterisk@Home-bak in te richten. Alles draait op zich, inbound gaat goed, outbound ben ik nog even mee aan het stoeien, maa rdat moet ook wel lukken, ik zit nu echter vast bij de IVR. Ik krijg het systeem zover dat een inbound call naar de IVR word gelust, ik heb keuzeopties toegevoegd, maar ik kan deze met geen mogelijkheid selecteren. Ik heb dtmfmode op info, auto, inband en rfc28832 gehad, geen effect. Ik gebruik alaw, dus dit mag ook geen probleem zijn.

Iemand enig idee?

**Stefan Mensink** · 26/01/06 18:33

Welk type toestel gebruik je hierbij? Heb je ook problemen met features zoals blindxfer te activeren?

Edit: Oh, Asterisk@home... ik las eerst gewoon Asterisk.

**jinxedworld** · 26/01/06 18:35

Ach, ik bewerk de configs ook handmatig :-)

Ik bel vanaf PSTN naar de asterisk-bak. Het toestel welke ik hier heb staan Northern Telecom 4X93PA op een Centrex centrale.

**rayden** · 26/01/06 18:55

Ik snap het niet, ik krijg inboud VoIPBuster met geen mogelijkheid an het werk

Kunnen jullie even je configs posten svp?

**Stefan Mensink** · 26/01/06 21:03

Net ook nog even getest inderdaad, hetzij met voipstunt.com (is ook voipbuster), en kreeg 'm inbound ook niet aan de Asterisk geknoopt.

Ik zal zo eens kijken of ik even een IVR kan inrichten en testen.

Graag zou ik ook de config voor inbound voipbuster zien, dan kan ik dat nummer gebruiken als testnummer.

**jinxedworld** · 26/01/06 21:16

Extentions.conf:

Code:

; Asterisk Management Portal (AMP)
; Copyright (C) 2004 Coalescent Systems Inc

; dialparties.agi (http://www.sprackett.com/asterisk/)
; Asterisk::AGI (http://asterisk.gnuinter.net/)
; gsm (http://www.ibiblio.org/pub/Linux/utils/compress/!INDEX.short.html)
; loligo sounds (http://www.loligo.com/asterisk/sounds/)
; mpg123 (http://voip-info.org/wiki-Asterisk+c...siconhold.conf)


; include extension contexts generated from AMP
#include extensions_additional.conf

; Customizations to this dialplan should be made in extensions_custom.conf
; See extensions_custom.conf.sample for an example
#include extensions_custom.conf

[from-trunk]							; just an alias since VoIP shouldn't be called PSTN
include => from-pstn

[from-pstn]
include => from-pstn-custom                     ; create this context in extensions_custom.conf to include customizations
include => ext-did
include => from-pstn-timecheck          ; this has to be included otherwise it overrides ext-did
exten => fax,1,Goto(ext-fax,in_fax,1)

[from-pstn-timecheck]
exten => _.,1,Goto(s,1)		; catch-all matching for calls that have DID info (if a DID route hasn't matched them)
exten => s,1,GotoIf($[${IN_OVERRIDE} = forcereghours]?from-pstn-reghours,s,1:)
exten => s,2,GotoIf($[${IN_OVERRIDE} = forceafthours]?from-pstn-afthours,s,1:)
exten => s,3,GotoIfTime(${REGTIME}|${REGDAYS}|*|*?from-pstn-reghours,s,1:)
exten => s,4,Goto(from-pstn-afthours,s,1)

[from-pstn-reghours]
exten => s,1,GotoIf($[${FAX_RX} = disabled]?from-pstn-reghours-nofax,s,1:2)	; if fax detection is disabled, then jump to from-pstn-nofax - else continue
exten => s,2,Answer	
exten => s,3,Wait(1)
exten => s,4,SetVar(intype=${INCOMING})
exten => s,5,Cut(intype=intype,-,1) 
exten => s,6,GotoIf($[${intype} = EXT]?7:9)		; If INCOMING starts with EXT, then assume its an extension
exten => s,7,Wait(3) 							;wait 3 more second to make sure this isn't a fax before dialing someone
exten => s,8,Goto(ext-local,${INCOMING:4},1)
exten => s,9,GotoIf($[${intype} = GRP]?10:12) 	; If INCOMING starts with GRP, then assume its a ring group
exten => s,10,Wait(3)
exten => s,11,Goto(ext-group,${INCOMING:4},1)
exten => s,12,GotoIf($[${intype} = QUE]?13:15)
exten => s,13,Wait(3)
exten => s,14,Goto(ext-queues,${INCOMING:4},1)
exten => s,15,Goto(${INCOMING},s,1) 			; not EXT or GR1 - it's an auto attendant
exten => fax,1,Goto(ext-fax,in_fax,1)
exten => h,1,Hangup

[from-pstn-reghours-nofax]
exten => s,1,SetVar(intype=${INCOMING})
exten => s,2,Cut(intype=intype,-,1) 
exten => s,3,GotoIf($[${intype} = EXT]?4:5)		; If INCOMING starts with EXT, then assume its an extension
exten => s,4,Goto(ext-local,${INCOMING:4},1)
exten => s,5,GotoIf($[${intype} = GRP]?6:7) 	; If INCOMING starts with GRP, then assume its a ring group
exten => s,6,Goto(ext-group,${INCOMING:4},1)
exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue
exten => s,8,Answer        						; answer call before queue
exten => s,9,Wait(1)
exten => s,10,Goto(ext-queues,${INCOMING:4},1)
exten => s,11,Answer        						; answer call before auto attendant
exten => s,12,Wait(1)							
exten => s,13,Goto(${INCOMING},s,1) 				; not EXT or GR1 - it's an auto attendant
exten => h,1,Hangup

[from-pstn-afthours]
exten => s,1,GotoIf($[${FAX_RX} = disabled]?from-pstn-afthours-nofax,s,1:2)	; if fax detection is disabled, then jump to from-pstn-nofax - else continue
exten => s,2,Answer	
exten => s,3,Wait(1)
exten => s,4,SetVar(intype=${AFTER_INCOMING})
exten => s,5,Cut(intype=intype,-,1) 
exten => s,6,GotoIf($[${intype} = EXT]?7:9)		; If INCOMING starts with EXT, then assume its an extension
exten => s,7,Wait(3) 							;wait 3 more second to make sure this isn't a fax before dialing someone
exten => s,8,Goto(ext-local,${AFTER_INCOMING:4},1)
exten => s,9,GotoIf($[${intype} = GRP]?10:12) 	; If INCOMING starts with GRP, then assume its a ring group
exten => s,10,Wait(3)
exten => s,11,Goto(ext-group,${AFTER_INCOMING:4},1)
exten => s,12,GotoIf($[${intype} = QUE]?13:15)
exten => s,13,Wait(3)
exten => s,14,Goto(ext-queues,${AFTER_INCOMING:4},1)
exten => s,15,Goto(${AFTER_INCOMING},s,1) 			; not EXT or GR1 - it's an auto attendant
exten => fax,1,Goto(ext-fax,in_fax,1)
exten => h,1,Hangup

[from-pstn-afthours-nofax]
exten => s,1,SetVar(intype=${AFTER_INCOMING})
exten => s,2,Cut(intype=intype,-,1) 
exten => s,3,GotoIf($[${intype} = EXT]?4:5)		; If INCOMING starts with EXT, then assume its an extension
exten => s,4,Goto(ext-local,${AFTER_INCOMING:4},1)
exten => s,5,GotoIf($[${intype} = GRP]?6:7) 	; If INCOMING starts with GRP, then assume its a ring group
exten => s,6,Goto(ext-group,${AFTER_INCOMING:4},1)
exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue
exten => s,8,Answer        						; answer call before queue
exten => s,9,Wait(1)
exten => s,10,Goto(ext-queues,${AFTER_INCOMING:4},1)
exten => s,11,Answer        						; answer call before auto attendant
exten => s,12,Wait(1)							
exten => s,13,Goto(${AFTER_INCOMING},s,1) 				; not EXT or GR1 - it's an auto attendant
exten => h,1,Hangup

; ############################################################################
; Macros [macro]
; ############################################################################

; Rings one or more extensions.  Handles things like call forwarding and DND
; We don't call dial directly for anything internal anymore.
; ARGS: $TIMER, $OPTIONS, $EXT1, $EXT2, $EXT3, ...
; Use a Macro call such as the following: 
;  Macro(dial,$DIAL_TIMER,$DIAL_OPTIONS,$EXT1,$EXT2,$EXT3,...)
[macro-dial]
exten => s,1,GotoIf($[ "${MACRO_CONTEXT}" = "macro-rg-group" ]?4:2)  ; if this is from rg-group, don't strip prefix
exten => s,2,GotoIf($["${CALLERIDNAME:0:${LEN(${RGPREFIX})}}" != "${RGPREFIX}"]?5:4)  ; check for ring-group prefix
exten => s,3,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off prefix
exten => s,4,AGI,dialparties.agi
exten => s,5,NoOp(Returned from dialparties with no extensions to call)
exten => s,6,SetVar(DIALSTATUS=BUSY)
exten => s,10,Dial(${ds})                               ; dialparties will set the priority to 10 if $ds is not null
exten => s,20,NoOp(Returned from dialparties with hunt groups to dial )
exten => s,21,SetVar(HuntLoop=0)
exten => s,22,GotoIf($[$[${HuntMembers} >= 1]?30 )  ; if this is from rg-group, don't strip prefix
exten => s,23,NoOp(Returning there are no members left in the hunt group to ring)

exten => s,30,SetVar(HuntMember=HuntMember${HuntLoop})
exten => s,31,GotoIf($[$[${CALLTRACE_HUNT} != "" ] & $["${RingGroupMethod}" = "hunt" ]]?32:35 )  ; Set CAll Trace for Hunt member we are going to call
        exten => s,32,Cut(CT_EXTEN=ARG3,,$[${HuntLoop} + 1])
        exten => s,33,DBput(CALLTRACE/${CT_EXTEN}=${CALLTRACE_HUNT})
        exten => s,34,Goto(s,42)

exten => s,35,GotoIf($[$[${CALLTRACE_HUNT} != "" ] & $["${RingGroupMethod}" = "memoryhunt" ]]?36:50 )  ;Set Call Trace for each hunt member we are going to call "Memory groups have multiple members to set CALL TRACE For hence the loop
        exten => s,36,SetVar(CTLoop=0)
        exten => s,37,GotoIf($[${CTLoop} > ${HuntLoop}]?42 )  ; if this is from rg-group, don't strip prefix
        exten => s,38,Cut(CT_EXTEN=ARG3,,$[${CTLoop} + 1])
        exten => s,39,DBput(CALLTRACE/${CT_EXTEN}=${CALLTRACE_HUNT})
        exten => s,40,SetVar(CTLoop=$[1 + ${CTLoop}])
        exten => s,41,Goto(s,37)
exten => s,42,Dial(${${HuntMember}}${ds} ) ; dialparties will set the priority to 20 if $ds is not null and its a hunt group
exten => s,43,SetVar(HuntLoop=$[1 + ${HuntLoop}])
exten => s,44,SetVar(HuntMembers=$[${HuntMembers} - 1])
exten => s,45,Goto(s,22)
exten => s,50,DBdel(CALLTRACE/${CT_EXTEN})
exten => s,51,Goto(s,42)


;exten => s,1,GotoIf($[ "${MACRO_CONTEXT}" = "macro-rg-group" ]?4:2)  ; if this is from rg-group, don't strip prefix
;exten => s,2,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?4:3)  ; check for ring-group prefix
;exten => s,3,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off prefix
;exten => s,4,AGI,dialparties.agi
;exten => s,5,NoOp(Returned from dialparties with no extensions to call)
;exten => s,6,SetVar(DIALSTATUS=BUSY)
;exten => s,10,Dial(${ds})                               ; dialparties will set the priority to 10 if $ds is not null

; Ring an extension, if the extension is busy or there is no answer send it
; to voicemail
; ARGS: $VMBOX, $EXT
[macro-exten-vm]
exten => s,1,Macro(user-callerid)
exten => s,2,Setvar(FROMCONTEXT=exten-vm)
exten => s,3,Macro(record-enable,${ARG2},IN)
exten => s,4,Macro(dial,${RINGTIMER},${DIAL_OPTIONS},${ARG2})
exten => s,5,GotoIf($[${CHANNEL:0:5} = Local]?s-${DIALSTATUS},1) ; if the channel is Local, then do not go to voicemail.  This is primarily to avoid vm for call-forwarded extensions in ring groups
exten => s,6,GotoIf($[${ARG1} = novm]?s-${DIALSTATUS},1) ; no voicemail in use for this extension
exten => s,7,NoOp(Sending to Voicemail box ${ARG2})
exten => s,8,Macro(vm,${ARG1},${DIALSTATUS})
exten => s-BUSY,1,NoOp(Extension is reporting BUSY and has no Voicemail)
exten => s-BUSY,2,Busy()
exten => s-BUSY,3,Wait(60)
exten => s-BUSY,4,NoOp()
exten => _s-.,1,Congestion()

[macro-vm]
exten => s,1,Macro(user-callerid)
exten => s,2,Goto(s-${ARG2},1)
exten => s-BUSY,1,Voicemail(b${ARG1})   ; Voicemail Busy message
exten => s-BUSY,2,Hangup()
exten => _s-.,1,Voicemail(u${ARG1})     ; Voicemail Unavailable message
exten => _s-.,2,Hangup()
exten => o,1,Background(one-moment-please)      ; 0 during vm message will hangup
exten => o,2,GotoIf($["foo${FROM_DID}" = "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1)
exten => a,1,VoiceMailMain(${ARG1})
exten => a,2,Hangup

; For some reason, if I don't run setCIDname, CALLERIDNAME will be blank in my AGI
; ARGS: none
[macro-fixcid]
exten => s,1,SetCIDName(${CALLERIDNAME})

; Ring groups of phones
; ARGS: comma separated extension list
; 1 - Ring Group Strategy
; 2 - ringtimer
; 3 - prefix
; 4 - extension list
[macro-rg-group]
exten => s,1,Macro(user-callerid)
exten => s,2,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?4:3)  ; check for old prefix
exten => s,3,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off old prefix
exten => s,4,Setvar(RGPREFIX=${ARG3})  ; set new prefix
exten => s,5,SetCIDName(${RGPREFIX}${CALLERIDNAME})  ; add prefix to callerid name
exten => s,6,Setvar(RecordMethod=Group)  ; set new prefix
exten => s,7,Macro(record-enable,${MACRO_EXTEN},${RecordMethod})
exten => s,8,SetVar(RingGroupMethod=${ARG1})     ;
exten => s,9,Macro(dial,${ARG2},${DIAL_OPTIONS},${ARG4})
exten => s,10,SetVar(RingGroupMethod='')     ;


;
; Outgoing channel(s) are busy ... inform the client
;
[macro-outisbusy]
exten => s,1,Playback(all-circuits-busy-now)
exten => s,2,Playback(pls-try-call-later)
exten => s,3,Macro(hangupcall)

; What to do on hangup.
[macro-hangupcall]
exten => s,1,ResetCDR(w)
exten => s,2,NoCDR()
exten => s,3,Wait(5)
exten => s,4,Hangup

[macro-faxreceive]
exten => s,1,SetVar(FAXFILE=/var/spool/asterisk/fax/${UNIQUEID}.tif)
exten => s,2,SetVar(EMAILADDR=${FAX_RX_EMAIL})
exten => s,3,rxfax(${FAXFILE})
exten => s,103,SetVar(EMAILADDR=${FAX_RX_EMAIL})
exten => s,104,Goto(3)

; dialout and strip the prefix
[macro-dialout]
exten => s,1,Macro(user-callerid)
exten => s,2,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?5) 	;check for CID override for exten
exten => s,3,SetCallerID(${ECID${CALLERIDNUM}})
exten => s,4,Goto(7)
exten => s,5,GotoIf($[foo${OUTCID_${ARG1}} = foo]?7) 		;check for CID override for trunk
exten => s,6,SetCallerID(${OUTCID_${ARG1}})
exten => s,7,SetVar(length=${LEN(${DIAL_OUT_${ARG1}})})
exten => s,8,Dial(${OUT_${ARG1}}/${ARG2:${length}})
exten => s,9,Congestion
exten => s,109,Macro(outisbusy)


; dialout using default OUT trunk - no prefix
[macro-dialout-default]
exten => s,1,Macro(user-callerid)
exten => s,2,Macro(record-enable,${CALLERIDNUM},OUT)
exten => s,3,Macro(outbound-callerid,${ARG1})
exten => s,4,Dial(${OUT}/${ARG1})
exten => s,5,Congestion
exten => s,105,Macro(outisbusy)

; dialout using a trunk, using pattern matching (don't strip any prefix)
; arg1 = trunk number, arg2 = number, arg3 = route password
[macro-dialout-trunk]
exten => s,1,GotoIf($[foo${ARG3} = foo]?3:2))	; arg3 is pattern password
exten => s,2,Authenticate(${ARG3})
exten => s,3,Macro(user-callerid)
exten => s,4,Macro(record-enable,${CALLERIDNUM},OUT)
exten => s,5,Macro(outbound-callerid,${ARG1})
exten => s,6,SetGroup(OUT_${ARG1})
exten => s,7,CheckGroup(${OUTMAXCHANS_${ARG1}})
; if we've used up the max channels, continue at (n+101)
exten => s,8,SetVar(DIAL_NUMBER=${ARG2})
exten => s,9,SetVar(DIAL_TRUNK=${ARG1})
exten => s,10,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk
exten => s,11,SetVar(OUTNUM=${OUTPREFIX_${ARG1}}${DIAL_NUMBER})  ; OUTNUM is the final dial number
exten => s,12,Cut(custom=OUT_${ARG1},:,1)  ; Custom trunks are prefixed with "AMP:"
exten => s,13,GotoIf($[${custom} = AMP]?16)
exten => s,14,Dial(${OUT_${ARG1}}/${OUTNUM})  ; Regular Trunk Dial
exten => s,15,Goto(s-${DIALSTATUS},1)

; This is a custom trunk.  Substitute $OUTNUM$ with the actual number and rebuild the dialstring
; example trunks: "AMP:CAPI/XXXXXXXX:b$OUTNUM$,30,r", "AMP:OH323/$OUTNUM$@XX.XX.XX.XX:XXXX"
exten => s,16,Cut(pre_num=OUT_${ARG1},$,1)
exten => s,17,Cut(the_num=OUT_${ARG1},$,2)  ; this is where we expect to find string OUTNUM
exten => s,18,Cut(post_num=OUT_${ARG1},$,3)
exten => s,19,GotoIf($[${the_num} = OUTNUM]?20:21) ; if we didn't find "OUTNUM", then skip to Dial
exten => s,20,SetVar(the_num=${OUTNUM}) ; replace "OUTNUM" with the actual number to dial
exten => s,21,Dial(${pre_num:4}${the_num}${post_num})
exten => s,22,Goto(s-${DIALSTATUS},1)

exten => s,108,Noop(max channels used up)
exten => s-BUSY,1,NoOp(Trunk is reporting BUSY)
exten => s-BUSY,2,Busy()
exten => s-BUSY,3,Wait(60)
exten => s-BUSY,4,NoOp()

exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS})

; Adds a dynamic agent/member to a Queue
; Prompts for call-back number - in not entered, uses CIDNum
[macro-agent-add]
exten => s,1,Wait(1)
exten => s,2,Macro(user-callerid)
exten => s,3,Read(CALLBACKNUM,agent-user)  	; get callback number from user
exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7))	; if user just pressed # or timed out, use cidnum
exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM})
exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2))	; if still no number, start over
exten => s,7,GotoIf($[foo${ARG2} = foo]?9:8))	; arg2 is queue password
exten => s,8,Authenticate(${ARG2})
exten => s,9,AddQueueMember(${ARG1}|Local/${CALLBACKNUM}@from-internal)	; using chan_local allows us to have agents over trunks
exten => s,10,Wait(1)
exten => s,11,Playback(agent-loginok)
exten => s,12,Hangup()

; Removes a dynamic agent/member from a Queue
; Prompts for call-back number - in not entered, uses CIDNum
[macro-agent-del]
exten => s,1,Wait(1)
exten => s,2,Macro(user-callerid)
exten => s,3,Read(CALLBACKNUM,agent-user)  	; get callback number from user
exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7))	; if user just pressed # or timed out, use cidnum
exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM})
exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2))	; if still no number, start over
exten => s,7,RemoveQueueMember(${ARG1}|Local/${CALLBACKNUM}@from-internal)
exten => s,8,Wait(1)
exten => s,9,Playback(agent-loggedoff)
exten => s,10,Hangup()

[to-voipbusters]
; Bel 9 voor een buitenlijn
;
exten => _900.,1,Dial(SIP/${EXTEN:1}@voipbuster)
exten => _906,1,Answer
exten => _906,2,Playtones(congestion)
exten => _906,3,Congestion(5)

exten => _9090,1,Answer
exten => _9090,2,Playtones(congestion)
exten => _9090,3,Congestion(5)

exten => _90[12345789].,1,Dial(SIP/0031${EXTEN:2}@voipbuster,30,rt)
exten => _90[12345789].,2,SetVar(FALLBACKNUMMER=${EXTEN})
exten =>
_90[12345789].,3,Gotoif(${DIALSTATUS}=NOANSWER?to-voipbusters,_90[12345789].,5:to-voipbusters,_90[12345789].,4)
exten => _90[12345789].,4,Dial(SIP/0031${FALLBACKNUMMER:2}@voipbuster,30,t)
exten => _90[12345789].,5,NoOp(${DIALSTATUS})
exten => _90[12345789].,6,Hangup()

exten => _9Z.,1,Dial(SIP/003158${EXTEN:1}@voipbuster,30,t)
exten => _9Z.,2,SetVar(FALLBACKNUMMER=${EXTEN})
exten =>
_9Z.,3,Gotoif(${DIALSTATUS}=NOANSWER?to-voipbusters,_9Z.,5:to-voipbusters,_9Z.,4)
exten => _9Z.,4,Dial(SIP/003158${FALLBACKNUMMER:1}@voipbuster,30,t)
exten => _9Z.,5,NoOp(${DIALSTATUS})
exten => _9Z.,6,Hangup()

; arg1 = trunk number, arg2 = number
[macro-dialout-enum]
exten => s,1,Macro(user-callerid)
exten => s,2,Macro(record-enable,${CALLERIDNUM},OUT)
exten => s,3,Macro(outbound-callerid,${ARG1})
exten => s,4,SetGroup(OUT_${ARG1})
exten => s,5,CheckGroup(${OUTMAXCHANS_${ARG1}})		; if we've used up the max channels, continue at (n+101)
exten => s,6,SetVar(DIAL_NUMBER=${ARG2})
exten => s,7,SetVar(DIAL_TRUNK=${ARG1})
exten => s,8,AGI(fixlocalprefix) 						; this sets DIAL_NUMBER to the proper dial string for this trunk
exten => s,9,EnumLookup(${DIAL_NUMBER})
exten => s,10,GotoIf($[$[${ENUM:0:3} = SIP] | $[${ENUM:0:3} = IAX]]?11:63)
exten => s,11,Dial(${ENUM})
exten => s,12,Goto(s-${DIALSTATUS},1)
; if dial fails (ie, all channels are busy), continue at 116 (n+101)

; exit points for macro
exten => s,63,NoOp(EnumLookup failed)
exten => s,106,NoOp(max channels used up)

exten => s-BUSY,1,NoOp(Trunk is reporting BUSY)
exten => s-BUSY,2,Busy()
exten => s-BUSY,3,Wait(60)
exten => s-BUSY,4,NoOp()

exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS})

[macro-record-enable]
exten => s,1,GotoIf(${LEN(${BLINDTRANSFER})} > 0?2:4)
exten => s,2,ResetCDR(w)
exten => s,3,StopMonitor()
exten => s,4,AGI(recordingcheck,${TIMESTAMP},${UNIQUEID})
exten => s,5,Noop(No recording needed) 
exten => s,999,Monitor(wav49,${CALLFILENAME}, mb)

;exten => s,3,BackGround(for-quality-purposes)
;exten => s,4,BackGround(this-call-may-be)
;exten => s,5,BackGround(recorded)

; This macro is for dev purposes and just dumps channel/app variables.  Useful when designing new contexts. 
[macro-dumpvars]
exten => s,1,Noop(ACCOUNTCODE=${ACCOUNTCODE})
exten => s,2,Noop(ANSWEREDTIME=${ANSWEREDTIME})
exten => s,3,Noop(BLINDTRANSFER=${BLINDTRANSFER})
exten => s,4,Noop(CALLERID=${CALLERID})
exten => s,5,Noop(CALLERIDNAME=${CALLERIDNAME})
exten => s,6,Noop(CALLERIDNUM=${CALLERIDNUM})
exten => s,7,Noop(CALLINGPRES=${CALLINGPRES})
exten => s,8,Noop(CHANNEL=${CHANNEL})
exten => s,9,Noop(CONTEXT=${CONTEXT})
exten => s,10,Noop(DATETIME=${DATETIME})
exten => s,11,Noop(DIALEDPEERNAME=${DIALEDPEERNAME})
exten => s,12,Noop(DIALEDPEERNUMBER=${DIALEDPEERNUMBER})
exten => s,13,Noop(DIALEDTIME=${DIALEDTIME})
exten => s,14,Noop(DIALSTATUS=${DIALSTATUS})
exten => s,15,Noop(DNID=${DNID})
exten => s,16,Noop(EPOCH=${EPOCH})
exten => s,17,Noop(EXTEN=${EXTEN})
exten => s,18,Noop(HANGUPCAUSE=${HANGUPCAUSE})
exten => s,19,Noop(INVALID_EXTEN=${INVALID_EXTEN})
exten => s,20,Noop(LANGUAGE=${LANGUAGE})
exten => s,21,Noop(MEETMESECS=${MEETMESECS})
exten => s,22,Noop(PRIORITY=${PRIORITY})
exten => s,23,Noop(RDNIS=${RDNIS})
exten => s,24,Noop(SIPDOMAIN=${SIPDOMAIN})
exten => s,25,Noop(SIP_CODEC=${SIP_CODEC})
exten => s,26,Noop(SIPCALLID=${SIPCALLID})
exten => s,27,Noop(SIPUSERAGENT=${SIPUSERAGENT})
exten => s,28,Noop(TIMESTAMP=${TIMESTAMP})
exten => s,29,Noop(TXTCIDNAME=${TXTCIDNAME})
exten => s,30,Noop(UNIQUEID=${UNIQUEID})
exten => s,31,Noop(TOUCH_MONITOR=${TOUCH_MONITOR})
exten => s,32,Noop(MACRO_CONTEXT=${MACRO_CONTEXT})
exten => s,33,Noop(MACRO_EXTEN=${MACRO_EXTEN})
exten => s,34,Noop(MACRO_PRIORITY=${MACRO_PRIORITY})

[macro-user-logon]
; check device type
exten => s,1,DBget(DEVICETYPE=DEVICE/${CALLERIDNUM}/type)
exten => s,2,GotoIf($[${DEVICETYPE} = fixed]?s-FIXED,1)
; get user's extension
exten => s,3,SetVar(AMPUSER=${ARG1})
exten => s,4,GotoIf($[foo${AMPUSER} = foo]?5:9)
exten => s,5,BackGround(please-enter-your)
exten => s,6,Playback(extension)
exten => s,7,Read(AMPUSER,then-press-pound)
; get user's password and authenticate
exten => s,8,Wait(1)
exten => s,9,DBget(AMPUSERPASS=AMPUSER/${AMPUSER}/password)
exten => s,10,GotoIf($[${LEN(${AMPUSERPASS})} = 0]?s-NOPASSWORD,1)
; do not continue if the user has already logged onto this device
exten => s,11,DBget(DEVICEUSER=DEVICE/${CALLERIDNUM}/user)
exten => s,12,GotoIf($[${DEVICEUSER} = ${AMPUSER}]?s-ALREADYLOGGEDON,1)
exten => s,13,Authenticate(${AMPUSERPASS})
; devices can only be mapped to one user - loggoff anyone else who is here
exten => s,14,Macro(user-logoff)
; map user to device
exten => s,15,DBget(AMPUSERDEVICES=AMPUSER/${AMPUSER}/device)
exten => s,16,GotoIf($[${LEN(${AMPUSERDEVICES})} = 0]?18) 
exten => s,17,SetVar(AMPUSERDEVICES=${AMPUSERDEVICES}&)
exten => s,18,SetVar(AMPUSERDEVICES=${AMPUSERDEVICES}${CALLERIDNUM})
exten => s,19,DBPut(AMPUSER/${AMPUSER}/device=${AMPUSERDEVICES})
; map device to user
exten => s,20,DBPut(DEVICE/${CALLERIDNUM}/user=${AMPUSER})
; create symlink from dummy device mailbox to user's mailbox
exten => s,21,System(/bin/ln -s /var/spool/asterisk/voicemail/default/${AMPUSER}/ /var/spool/asterisk/voicemail/device/${CALLERIDNUM})

exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged into)
exten => s-FIXED,2,Playback(ha/phone)
exten => s-FIXED,3,SayDigits(${CALLERIDNUM})
exten => s-FIXED,4,Playback(is-curntly-unavail)
exten => s-FIXED,5,Playback(vm-goodbye)
exten => s-FIXED,6,Hangup ;TODO should play msg indicated device cannot be logged into 

exten => s-ALREADYLOGGEDON,1,NoOp(This device has already been logged into by this user)
exten => s-ALREADYLOGGEDON,2,Playback(vm-goodbye)
exten => s-ALREADYLOGGEDON,3,Hangup ;TODO should play msg indicated device is already logged into 

exten => s-NOPASSWORD,1,NoOp(This extension does not exist or no password is set)
exten => s-NOPASSWORD,2,Playback(an-error-has-occured)
exten => s-NOPASSWORD,3,Playback(vm-goodbye)
exten => s-NOPASSWORD,4,Hangup ;TODO should play msg indicated device is already logged into 

[macro-user-logoff]
; check device type
exten => s,1,DBget(DEVICETYPE=DEVICE/${CALLERIDNUM}/type)
exten => s,2,GotoIf($[${DEVICETYPE} = fixed]?s-FIXED,1)
; remove entry from user's DEVICE key
; delete the symlink to user's voicemail box
exten => s,3,System(rm -f /var/spool/asterisk/voicemail/device/${CALLERIDNUM})
exten => s,4,DBget(DEVAMPUSER=DEVICE/${CALLERIDNUM}/user)
exten => s,5,DBget(AMPUSERDEVICES=AMPUSER/${DEVAMPUSER}/device)
exten => s,6,AGI(list-item-remove.php,${AMPUSERDEVICES},${CALLERIDNUM},AMPUSERDEVICES,&)
; reset user -> device mapping
; users can log onto multiple devices, need to just remove device from value
exten => s,7,DBput(AMPUSER/${DEVAMPUSER}/device=${AMPUSERDEVICES})
; reset device -> user mapping
exten => s,8,DBput(DEVICE/${CALLERIDNUM}/user=none)
exten => s,9,Playback(vm-goodbye)

exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged out of)
exten => s-FIXED,2,Playback(an-error-has-occured)
exten => s-FIXED,3,Playback(vm-goodbye)
exten => s-FIXED,4,Hangup ;TODO should play msg indicated device cannot be logged into 

;sets the callerid of the device to that of the logged in user
[macro-user-callerid]
exten => s,1,DBget(AMPUSER=DEVICE/${CALLERIDNUM}/user)
exten => s,2,DBget(AMPUSERCIDNAME=AMPUSER/${AMPUSER}/cidname)
exten => s,3,GotoIf($["foo${AMPUSERCIDNAME}" = "foo"]?5) 
exten => s,4,SetCallerID("${AMPUSERCIDNAME}" <${AMPUSER}>)
exten => s,5,NoOp(Using CallerID ${CALLERID})

; overrides callerid out trunks
; arg1 is trunk
; macro-user-callerid should be called _before_ using this macro
[macro-outbound-callerid]
exten => s,1,DBget(USEROUTCID=AMPUSER/${CALLERIDNUM}/outboundcid)
exten => s,2,GotoIf($["foo${OUTCID_${ARG1}:1:2}" = "foo"]?4)  ;check for CID override for trunk
exten => s,3,SetCallerID(${OUTCID_${ARG1}})
exten => s,4,GotoIf($["foo${USEROUTCID:1:2}" = "foo"]?6) ; check CID override for extension
exten => s,5,SetCallerID(${USEROUTCID})
exten => s,6,NoOp(CallerID set to ${CALLERID})



; ############################################################################
; Applications [app]
; ############################################################################
;
[app-directory]
;DIR-CONTEXT set in Digital Receptionist
exten => #,1,Wait(1)
exten => #,2,AGI(directory,${DIR-CONTEXT},ext-local,${DIRECTORY:0:1}${DIRECTORY_OPTS}o)
exten => #,3,Playback(vm-goodbye)
exten => #,4,Hangup
; *411 will access the entire directory (not just a single context)
exten => *411,1,Answer
exten => *411,2,Wait(1)
exten => *411,3,AGI(directory,general,ext-local,${DIRECTORY:0:1}${DIRECTORY_OPTS})
exten => *411,4,Playback(vm-goodbye)
exten => *411,5,Hangup
exten => h,1,Hangup
exten => o,1,GotoIf($["foo${FROM_DID}" = "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1)

[app-dnd]
exten => *78,1,Answer
exten => *78,2,Wait(1)
exten => *78,3,Macro(user-callerid)
exten => *78,4,DBput(DND/${CALLERIDNUM}=YES)
exten => *78,5,Playback(do-not-disturb)
exten => *78,6,Playback(activated)
exten => *78,7,Macro(hangupcall)
exten => *79,1,Answer
exten => *79,2,Wait(1)
exten => *79,3,Macro(user-callerid)
exten => *79,4,DBdel(DND/${CALLERIDNUM})
exten => *79,5,Playback(do-not-disturb)
exten => *79,6,Playback(de-activated)
exten => *79,7,Macro(hangupcall)

[app-messagecenter]
exten => *98,1,Answer
exten => *98,2,Wait(1)
exten => *98,3,VoiceMailMain(default)
exten => *98,4,Macro(hangupcall)
exten => _*98X.,1,Answer			; can dial *98<exten> to skip 'mailbox' prompt.  Useful for speedial.
exten => _*98X.,2,Wait(1)
exten => _*98X.,3,VoiceMailMain(${EXTEN:3}@default)
exten => _*98X.,4,Macro(hangupcall)
exten => *97,1,Answer
exten => *97,2,Wait(1)
exten => *97,3,Macro(user-callerid)
exten => *97,4,VoicemailMain(${CALLERIDNUM}@default)
exten => *97,5,Macro(hangupcall)

[app-callwaiting]
exten => *70,1,Answer
exten => *70,2,Wait(1)
exten => *70,3,Macro(user-callerid)
exten => *70,4,DBput(CW/${CALLERIDNUM}=ENABLED)
exten => *70,5,Playback(call-waiting)
exten => *70,6,Playback(activated)
exten => *70,7,Macro(hangupcall)
exten => *71,1,Answer
exten => *71,2,Wait(1)
exten => *71,3,Macro(user-callerid)
exten => *71,4,DBdel(CW/${CALLERIDNUM})
exten => *71,5,Playback(call-waiting)
exten => *71,6,Playback(de-activated)
exten => *71,7,Macro(hangupcall)

[app-callforward]
; dialed call forward app - forwards calling extension
exten => _*72.,1,Macro(user-callerid)
exten => _*72.,2,DBput(CF/${CALLERIDNUM}=${EXTEN:3})
exten => _*72.,3,Answer
exten => _*72.,4,Wait(1)
exten => _*72.,5,Playback(call-fwd-unconditional)
exten => _*72.,6,Playback(for)
exten => _*72.,7,Playback(extension)
exten => _*72.,8,SayDigits(${CALLERIDNUM})
exten => _*72.,9,Playback(is-set-to)
exten => _*72.,10,SayDigits(${EXTEN:3})
exten => _*72.,11,Macro(hangupcall)
; prompting call forward app - forwards entered extension
exten => *72,1,Answer
exten => *72,2,Wait(1)
exten => *72,3,BackGround(please-enter-your)
exten => *72,4,Playback(extension)
exten => *72,5,Read(fromext,then-press-pound)
exten => *72,6,Wait(1)
exten => *72,7,BackGround(ent-target-attendant)
exten => *72,8,Read(toext,then-press-pound)
exten => *72,9,Wait(1)
exten => *72,10,DBput(CF/${fromext}=${toext})
exten => *72,11,Playback(call-fwd-unconditional)
exten => *72,12,Playback(for)
exten => *72,13,Playback(extension)
exten => *72,14,SayDigits(${fromext})
exten => *72,15,Playback(is-set-to)
exten => *72,16,SayDigits(${toext})
exten => *72,17,Macro(hangupcall)
; cancels dialed extension call forward
exten => _*73.,1,DBdel(CF/${EXTEN:3})
exten => _*73.,2,Answer
exten => _*73.,3,Wait(1)
exten => _*73.,4,SayDigits(${EXTEN:3})
exten => _*73.,5,Playback(call-fwd-cancelled)
exten => _*73.,6,Macro(hangupcall)
; cancels call forward for calling extension
exten => *73,1,Macro(user-callerid)
exten => *73,2,DBdel(CF/${CALLERIDNUM})
exten => *73,3,Answer
exten => *73,4,Wait(1)
exten => *73,5,Playback(call-fwd-cancelled)
exten => *73,6,Macro(hangupcall)
; dialed call forward on busy app - forwards calling extension when busy
exten => _*90.,1,Macro(user-callerid)
exten => _*90.,2,DBput(CFB/${CALLERIDNUM}=${EXTEN:3})
exten => _*90.,3,Answer
exten => _*90.,4,Wait(1)
exten => _*90.,5,Playback(call-fwd-on-busy)
exten => _*90.,6,Playback(for)
exten => _*90.,7,Playback(extension)
exten => _*90.,8,SayDigits(${CALLERIDNUM})
exten => _*90.,9,Playback(is-set-to)
exten => _*90.,10,SayDigits(${EXTEN:3})
exten => _*90.,11,Macro(hangupcall)
; cancels call forward on busy for calling extension
exten => *91,1,Macro(user-callerid)
exten => *91,2,DBdel(CFB/${CALLERIDNUM})
exten => *91,3,Answer
exten => *91,4,Wait(1)
exten => *91,5,Playback(call-fwd-on-busy)
exten => *91,6,Playback(de-activated)
exten => *91,7,Macro(hangupcall)
exten => h,1,Hangup

[app-calltrace]
; We can't have our timeouts or dial digits collide with other applications
; or extensions, so we build the app in pieces
exten => *69,1,Goto(app-calltrace-perform,s,1)

[app-calltrace-perform]
exten => s,1,Macro(user-callerid)
exten => s,2,Answer
exten => s,3,Wait(1)
exten => s,4,Background(info-about-last-call)
exten => s,5,Background(telephone-number)
exten => s,6,Dbget(lastcaller=CALLTRACE/${CALLERIDNUM})
exten => s,7,GotoIf($[${lastcaller}]?8:14)
exten => s,8,SayDigits(${lastcaller})
exten => s,9,DigitTimeout(3)
exten => s,10,ResponseTimeout(7)
exten => s,11,Background(to-call-this-number)
exten => s,12,Background(press-1)
exten => s,13,Goto(16)
exten => s,14,Playback(from-unknown-caller)
exten => s,15,Macro(hangupcall)
exten => s,16,NoOp
exten => 1,1,Goto(from-internal,${lastcaller},1);
exten => i,1,Playback(vm-goodbye)
exten => i,2,Macro(hangupcall)
exten => t,1,Playback(vm-goodbye)
exten => t,2,Macro(hangupcall)

[app-userlogonoff]
exten => *11,1,Macro(user-logon)
exten => *11,2,Hangup()
exten => _*11.,1,Macro(user-logon,${EXTEN:3})
exten => _*11.,2,Hangup()
exten => *12,1,Macro(user-logoff)
exten => *12,2,Hangup()

; ############################################################################
; Inbound Contexts [from]
; ############################################################################

[from-sip-external]

;give external sip users congestion and hangup
exten => _.,1,AbsoluteTimeout(15)
exten => _.,2,Congestion 
exten => _.,3,Hangup

[from-internal]
;allow phones to use applications
include => app-userlogonoff
include => app-directory
include => app-dnd
include => app-callforward
include => app-callwaiting
include => app-messagecenter
include => app-calltrace
include => parkedcalls
include => from-internal-custom
;allow phones to dial other extensions
include => ext-fax
include => ext-local
include => ext-group
include => ext-queues
include => ext-zapbarge
include => ext-meetme
include => ext-record
include => ext-test
;allow phones to access trunks
include => outbound-allroutes
exten => s,1,Macro(hangupcall)
exten => h,1,Macro(hangupcall)

; ############################################################################
; Extension Contexts [ext]
; ############################################################################

[ext-zapbarge]
exten => 888,1,Macro(user-callerid)
exten => 888,2,SetGroup(${CALLERIDNUM})
exten => 888,3,Answer
exten => 888,4,Wait(1)
exten => 888,5,ZapBarge
exten => 888,6,Hangup

[ext-meetme]
exten => _8X,1,Macro(user-callerid)
exten => _8X,2,Answer
exten => _8X,3,Wait(1)
exten => _8X,4,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?6:5)
exten => _8X,5,MeetMe(${EXTEN}|sM)
exten => _8X,6,MeetMe(${EXTEN}|asM)

exten => _8XX,1,Macro(user-callerid)
exten => _8XX,2,Answer
exten => _8XX,3,Wait(1)
exten => _8XX,4,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?6:5)
exten => _8XX,5,MeetMe(${EXTEN}|sM)
exten => _8XX,6,MeetMe(${EXTEN}|asM)

exten => _8XXX,1,Macro(user-callerid)
exten => _8XXX,2,Answer
exten => _8XXX,3,Wait(1)
exten => _8XXX,4,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?6:5)
exten => _8XXX,5,MeetMe(${EXTEN}|sM)
exten => _8XXX,6,MeetMe(${EXTEN}|asM)

exten => _8XXXX,1,Macro(user-callerid)
exten => _8XXXX,2,Answer
exten => _8XXXX,3,Wait(1)
exten => _8XXXX,4,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?6:5)
exten => _8XXXX,5,MeetMe(${EXTEN}|sM)
exten => _8XXXX,6,MeetMe(${EXTEN}|asM)


[ext-fax]
exten => s,1,Answer
exten => s,2,Goto(in_fax,1)
exten => in_fax,1,GotoIf($[${FAX_RX} = system]?2:analog_fax,1)
exten => in_fax,2,Macro(faxreceive)
exten => in_fax,3,system(tiff2ps -2eaz -w 8.5 -h 11 ${FAXFILE} | ps2pdf - ${FAXFILE}.pdf)
exten => in_fax,4,system(mime-construct --to ${EMAILADDR} --subject "Fax from ${CALLERIDNUM} ${CALLERIDNAME}" --attachment ${CALLERIDNUM}.pdf --type application/pdf --file ${FAXFILE}.pdf)
exten => in_fax,5,system(rm ${FAXFILE} ${FAXFILE}.pdf)
exten => in_fax,6,Hangup
exten => analog_fax,1,GotoIf($[${FAX_RX} = disabled]?3:2)  ;if fax is disabled, just hang up
exten => analog_fax,2,DBGet(DIAL=DEVICE/${FAX_RX}/dial);
exten => analog_fax,3,Dial(${DIAL},20,d)
exten => analog_fax,4,Hangup
;exten => out_fax,1,wait(7)
exten => out_fax,1,txfax(${TXFAX_NAME}|caller)
exten => out_fax,2,Hangup
exten => h,1,Hangup()

[ext-record]
exten => *77,1,Macro(user-callerid)
exten => *77,2,Wait(2)
exten => *77,3,Record(${CALLERIDNUM}ivrrecording:wav) 
exten => *77,4,Wait(2)
exten => *77,5,Hangup
exten => *99,1,Macro(user-callerid)
exten => *99,2,Playback(${CALLERIDNUM}ivrrecording) 
exten => *99,3,Wait(2) 
exten => *99,4,Hangup 

;this is where parked calls go if they time-out.  Should probably re-ring
[default]
include => ext-local
exten => s,1,Playback(vm-goodbye)
exten => s,2,Macro(hangupcall)

[ext-test]
exten => 7777,1,Goto(from-pstn,s,1)
exten => 666,1,Goto(ext-fax,in_fax,1)
exten => h,1,Macro(hangupcall)

;echo test
exten => *43,1,Answer
exten => *43,2,Wait(2)
exten => *43,3,Playback(demo-echotest)
exten => *43,4,Echo
exten => *43,5,Playback(demo-echodone)
exten => *43,6,Hangup

sip.conf

Code:

; Note: If your SIP devices are behind a NAT and your Asterisk
;  server isn't, try adding "nat=1" to each peer definition to
;  solve translation problems.

[general]

port = 5060           ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0    ; Address to bind to (all addresses on machine)
dtmfmode=auto
disallow=all
allow=ulaw
allow=alaw
context = from-pstn ; Send unknown SIP callers to this context
callerid = Unknown

#include sip_nat.conf
#include sip_custom.conf
include sip_additional.conf

sip_additional.conf

Code:

register=<USER>:<PASS>@sip1.voipbuster.com

[1]
username=<USER>
type=friend
secret=<PASS>
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5060
nat=never
mailbox=1@device
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid=device <1>
accountcode=dennis

[voipbuster]
username=<USER>
type=friend
secret=<PASS>
qualify=no
nat=yes
insecure=very
host=connectionserver.voipbuster.com
fromuser=jinxedworld
fromdomain=connectionserver.voipbuster.com
dtmfmode=inband
disallow=all
context=from-pstn
canreinvite=no
allow=alaw
;context=IncomingVB

**rayden** · 26/01/06 21:18

Mask even je password!

**jinxedworld** · 26/01/06 21:20

Thx, dacht dat ik 'm overal had gemasked :S

**rayden** · 26/01/06 21:48

Outgoing werkt VoIPBuster hier ook momenteel niet.. krijg regiistrationtimeout.. :S

**Stefan Mensink** · 26/01/06 22:04

Outgoing geen problemen met sipdiscount en voipstunt. Incoming nog steeds helemaal niks. Rechtstreeks op de sip-telefoon wel, maar alleen zo nu en dan; zegmaar 1 op de 4 pogingen begint die te rammelen.

Asterisk:
Jan 26 22:06:39 WARNING[1809]: chan_sip.c:1103 retrans_pkt: Maximum retries exceeded on call 60f3f_etc_0@194.120.0.200 for seqno 0 (Critical Response)

**Stefan Mensink** · 26/01/06 22:12

Stapje verder, ik deed een sip debug peer voipstunt, en:

<-- SIP read from 194.120.0.201:5060:
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 217.115.199.90:5060;branch=z9hG4bK1c708f34
From: <sip:crushie@sip.voipstunt.com>;tag=as0fba327f
To: <sip:crushie@sip.voipstunt.com>
Contact: sip:194.120.0.201:5060
Call-ID: 090f249b03dc337612334d4c617a28cb@217.115.199.90
CSeq: 102 REGISTER
User-Agent: (Very nice Sip Registrar Server)
Allow: ACK,BYE,CANCEL,INVITE,REGISTER,OPTIONS
WWW-Authenticate: Digest realm="sipdiscount.com",nonce="283573656",algorith m=MD5
Content-Length: 0

Let op de Digest realm=........ *zucht*

**rayden** · 26/01/06 23:32

vreemd :S.. Outgoing werkt trouwens hier ook niet meer.. net getest.. krijg van alle SIP Servers 0,0 response..

**ju5t** · 26/01/06 23:40

Moet je niet DTMF compileren in Asterisk voor dat werkt? Wij hadden dit meteen al gedaan, dus ik weet niet of het zonder niet zou werken bij ons.

Code:

# nano /usr/src/asterisk/rtp.c

Zoek:
[34] = {1, AST_FORMAT_H263}, 
[103] = {1, AST_FORMAT_H263_PLUS}, 
[97] = {1, AST_FORMAT_ILBC}, 
[101] = {0, AST_RTP_DTMF}, 
[110] = {1, AST_FORMAT_SPEEX}, 

Voeg de volgende regel hier aan toe:
[96] = {0, AST_RTP_DTMF}, 

Hierna Asterisk recompilen:
# cd /usr/src/asterisk
# make clean 
# make 
# make install

Dat zou moeten werken.

**Ijsbox** · 27/01/06 11:46

om voipbuster/voipstunt/sipdiscount inbound werkend te krijgen moet je in de context die in sip.conf bij general genoemd wordt (in dit geval from-pstn) een extensie aanmaken met als nummer je loginnaam van voipbuster/voipstunt/sipdiscount.

Deze extensie hoeft alleen maar het volgende te zijn:

Code:

exten => <USERNAME>,1,Goto(s,1)

Maar DTMF heb ik bij deze aanbieder ook nog niet aan de praat gekregen, bij andere aanbieders werkt het als een zonnetje.

Onderwerp Gereedschap

Toon

Onderwerp: Asterisk@home IVR Probleem

Asterisk@home IVR Probleem

Webhostingtalk.nl

Link met ons

Partners

Contact