Likes: 0
07/11/08 09:59
Gister had een klant van ons een reboot gedaan van zijn server. Nu bleef deze bij fsck hangen dus heb ik dit handmatig gedaan.
Nu kreeg ik deze error:
tag 0 cmd 0xc8 Emask 0x9 stat 0x51 err 0x40 (media error)
Ik snap dat het ligt aan de hdd, maar is deze nu dood aan het gaan of is er iets anders aan de hand. Normaal gesproken als een hdd doodgaat geeft supermicro dit bij de boot weer.
07/11/08 10:02
draai even de smart diagnose-tools en post de uitvoer hier. Even zoeken naar "smart" in de threads op dit forum...
07/11/08 10:29
Code:xxx:~# smartctl -t short /dev/sda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Short Background Self Test has begun Use smartctl -X to abort test xxx:~# xxx:~# smartctl -a /dev/sda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: ATA WDC WD1600AAJS-0 Version: 58.0 Serial number: WD-WMAS20231383 Device type: disk Local Time is: Fri Nov 7 10:26:34 2008 CET Device does not support SMART Error Counter logging not supported [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] Device does not support Self Test logging
07/11/08 10:30
Kan ik de schijf enabelen voor smart in de config?
// edit
Heb al gezien dat dit via de bios gaat, en dat kan ik nu niet doen gezien ik niet op locatie ben.
Hier een output van hdparm, ik weet niet of je daar wat aan hebt:
Code:# for i in 1 2 3; do hdparm -tT /dev/sda; done /dev/sda: Timing cached reads: 2160 MB in 2.00 seconds = 1080.20 MB/sec Timing buffered disk reads: 226 MB in 3.00 seconds = 75.26 MB/sec /dev/sda: Timing cached reads: 2144 MB in 2.00 seconds = 1071.77 MB/sec Timing buffered disk reads: 228 MB in 3.02 seconds = 75.53 MB/sec /dev/sda: Timing cached reads: 2150 MB in 2.00 seconds = 1074.75 MB/sec Timing buffered disk reads: 226 MB in 3.01 seconds = 75.16 MB/sec
Laatst gewijzigd door Serveo; 07/11/08 om 10:46.
07/11/08 12:17
Je kan smart ook aanzetten door 'smart -s on /dev/disk' uit te voeren.
Soms moet je doen smart -a -s on -T permissive /dev/disk om alles te zien.
Die fout van je hoeft zeker niet te betekenen dat je disk dood is.
07/11/08 12:20
Bedankt, ik zal dit bekijken.
Nee, idd de server werkt weer normaal sinds ik fsck heb uitgevoerd gister. Maar ik wil er toch zeker van zijn, dat de disk niet dood aan het gaan is. Overigens is het waarschijnlijk een bug in de debian kernel.
07/11/08 12:33
Hou hem in ieder geval wel in de gaten Milan, wij hadden laatst ook een disk welke met fsck kennelijk weer in orde was, echter een paar dagen later was deze niet meer te redden.
07/11/08 12:36
Laat de output van smart even zien, dan zal ik even kijken of ik kan concluderen dat ie dood is of ok.Oorspronkelijk geplaatst door xsxn
07/11/08 12:36
die testjes zijn leuk, maar inderdaad niet altijd ondersteund
wat voor tabel levert "smartctl -a /dev/sda -d ata" je op?
07/11/08 12:38
Ik neem aan dat het smartd ipv smart.
Code:# smartd -s on /dev/sda smartd version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ =======> UNRECOGNIZED OPTION: s <======= Use smartd -h to get a usage summaryCode:# smartd -a -s on -T permissive /dev/sda smartd version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ =======> UNRECOGNIZED OPTION: a <======= Use smartd -h to get a usage summary
07/11/08 12:40
Hier de output:
Code:=== START OF INFORMATION SECTION === Device Model: WDC WD1600AAJS-00WAA0 Serial Number: WD-WMAS20231383 Firmware Version: 58.01D58 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Nov 7 12:39:14 2008 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (4200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 52) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 196 196 051 Pre-fail Always - 290 3 Spin_Up_Time 0x0003 152 152 021 Pre-fail Always - 3366 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 19 5 Reallocated_Sector_Ct 0x0033 195 195 140 Pre-fail Always - 35 7 Seek_Error_Rate 0x000e 200 192 051 Old_age Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1285 10 Spin_Retry_Count 0x0012 100 253 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 17 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 167 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 174 194 Temperature_Celsius 0x0022 112 099 000 Old_age Always - 31 196 Reallocated_Event_Count 0x0032 184 184 000 Old_age Always - 16 197 Current_Pending_Sector 0x0012 155 155 000 Old_age Always - 1189 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 270 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 270 occurred at disk power-on lifetime: 1272 hours (53 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 af 0f 04 e2 Error: AMNF at LBA = 0x02040faf = 33820591 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 af 0f 04 02 08 01:41:23.746 READ DMA ec 00 00 af 0f 04 00 08 01:41:23.745 IDENTIFY DEVICE c8 00 08 af 0f 04 02 08 01:41:20.811 READ DMA ec 00 00 af 0f 04 00 08 01:41:20.810 IDENTIFY DEVICE c8 00 08 af 0f 04 02 08 01:41:17.876 READ DMA Error 269 occurred at disk power-on lifetime: 1272 hours (53 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 af 0f 04 e2 Error: AMNF at LBA = 0x02040faf = 33820591 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 af 0f 04 02 08 01:41:20.811 READ DMA ec 00 00 af 0f 04 00 08 01:41:20.810 IDENTIFY DEVICE c8 00 08 af 0f 04 02 08 01:41:17.876 READ DMA ec 00 00 af 0f 04 00 08 01:41:17.875 IDENTIFY DEVICE c8 00 08 af 0f 04 02 08 01:41:14.941 READ DMA Error 268 occurred at disk power-on lifetime: 1272 hours (53 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 af 0f 04 e2 Error: AMNF at LBA = 0x02040faf = 33820591 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 af 0f 04 02 08 01:41:17.876 READ DMA ec 00 00 af 0f 04 00 08 01:41:17.875 IDENTIFY DEVICE c8 00 08 af 0f 04 02 08 01:41:14.941 READ DMA ec 00 00 af 0f 04 00 08 01:41:14.940 IDENTIFY DEVICE c8 00 08 af 0f 04 02 08 01:41:12.007 READ DMA Error 267 occurred at disk power-on lifetime: 1272 hours (53 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 af 0f 04 e2 Error: AMNF at LBA = 0x02040faf = 33820591 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 af 0f 04 02 08 01:41:14.941 READ DMA ec 00 00 af 0f 04 00 08 01:41:14.940 IDENTIFY DEVICE c8 00 08 af 0f 04 02 08 01:41:12.007 READ DMA ec 00 00 af 0f 04 00 08 01:41:12.006 IDENTIFY DEVICE c8 00 08 af 0f 04 02 08 01:41:09.069 READ DMA Error 266 occurred at disk power-on lifetime: 1272 hours (53 days + 0 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 af 0f 04 e2 Error: AMNF at LBA = 0x02040faf = 33820591 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 af 0f 04 02 08 01:41:12.007 READ DMA ec 00 00 af 0f 04 00 08 01:41:12.006 IDENTIFY DEVICE c8 00 08 af 0f 04 02 08 01:41:09.069 READ DMA ec 00 00 ae 0f 04 00 08 01:41:04.506 IDENTIFY DEVICE c8 00 08 a7 0f 04 02 08 01:41:01.406 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
07/11/08 12:43
Ik bedoelde smartctl, foutje.
Maareh, die schijf is hardstikke dood aan het gaan! Snel backuppen en vervangen.
196 Reallocated_Event_Count 0x0032 184 184 000 Old_age Always - 16
197 Current_Pending_Sector 0x0012 155 155 000 Old_age Always - 1189
= NIET goed
07/11/08 12:50
Oke bedankt voor de input. Had de data in ieder geval al gebackupt.
07/11/08 12:58
Inderdaad, niet meer helemaal gezond.
Hier wat uitleg:
1 Raw_Read_Error_Rate 290
kon 290 sectors niet vinden (problematisch)
4 Start_Stop_Count 19
19 keer aan gezet geweest (is niet veel)
5 Reallocated_Sector_Ct 35
heeft 35 sectors moeten verplaatsen naar reserve ruimte
9 Power_On_Hours 1285
dat is erg weinig, nog geen 2 maanden
196 Reallocated_Event_Count 16
16 keer iets mis gegaan (dat is niet goed)
07/11/08 13:01
Hier de info van een (iets betere) drive van WD:
Code:=== START OF INFORMATION SECTION === Device Model: WDC WD1601ABYS-01C0A0 Serial Number: WD-WCAS20417610 Firmware Version: 06.06H05 User Capacity: 164,696,555,520 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Nov 7 13:00:41 2008 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 160 160 021 Pre-fail Always - 2975 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 16 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4292 10 Spin_Retry_Count 0x0012 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16 194 Temperature_Celsius 0x0022 114 108 000 Old_age Always - 29 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
Quote