Likes: 
Ah kijk eens aan weer wat bijgeleerd
[root@asterix ~]# cat /etc/clamd.conf | more
##
## Example config file for the Clam AV daemon
## Please read the clamd.conf(5) manual before editing this file.
##
# Comment or remove the line below.
#Example
# Uncomment this option to enable logging.
# LogFile must be writable for the user running daemon.
# A full path is required.
# Default: disabled
LogFile /var/log/cmad.log
# By default the log file is locked for writing - the lock protects against
# running clamd multiple times (if want to run another clamd, please
# copy the configuration file, change the LogFile variable, and run
# the daemon with --config-file option).
# This option disables log file locking.
# Default: disabled
#LogFileUnlock
# Maximal size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M
# Log time with each message.
# Default: disabled
#LogTime
# Also log clean files. Useful in debugging but drastically increases the
# log size.
# Default: disabled
#LogClean
# Use system logger (can work together with LogFile).
# Default: disabled
#LogSyslog
# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL
# Enable verbose logging.
# Default: disabled
#LogVerbose
# This option allows you to save a process identifier of the listening
# daemon (main thread).
# Default: disabled
#PidFile /var/run/clamd.pid
# Optional path to the global temporary directory.
# Default: system specific (usually /tmp or /var/tmp).
#TemporaryDirectory /var/tmp
# Path to the database directory.
# Default: hardcoded (depends on installation options)
#DatabaseDirectory /var/lib/clamav
# The daemon works in a local OR a network mode. Due to security reasons we
# recommend the local mode.
# Path to a local socket file the daemon will listen on.
# Default: disabled
LocalSocket /tmp/clamd
# Remove stale socket after unclean shutdown.
# Default: disabled
FixStaleSocket
# TCP port address.
# Default: disabled
#TCPSocket 3310
# TCP address.
# By default we bind to INADDR_ANY, probably not wise.
# Enable the following to provide some degree of protection
# from the outside world.
# Default: disabled
#TCPAddr 127.0.0.1
# Maximum length the queue of pending connections may grow to.
# Default: 15
#MaxConnectionQueueLength 30
# Clamd uses FTP-like protocol to receive data from remote clients.
# If you are using clamav-milter to balance load between remote clamd daemons
# on firewall servers you may need to tune the options below.
# Close the connection when the data size limit is exceeded.
# The value should match your MTA's limit for a maximal attachment size.
# Default: 10M
#StreamMaxLength 20M
# Limit port range.
# Default: 1024
#StreamMinPort 30000
# Default: 2048
#StreamMaxPort 32000
# Maximal number of threads running at the same time.
# Default: 10
#MaxThreads 20
# Waiting for data from a client socket will timeout after this time (seconds).
# Value of 0 disables the timeout.
# Default: 120
#ReadTimeout 300
# Waiting for a new job will timeout after this time (seconds).
# Default: 30
#IdleTimeout 60
# Maximal depth directories are scanned at.
# Default: 15
#MaxDirectoryRecursion 20
# Follow directory symlinks.
# Default: disabled
#FollowDirectorySymlinks
# Follow regular file symlinks.
# Default: disabled
#FollowFileSymlinks
# Perform internal sanity check (database integrity and freshness).
# Default: 1800 (30 min)
#SelfCheck 600
# Execute a command when virus is found. In the command string %v will
# be replaced by a virus name.
# Default: disabled
#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"
# Run as a selected user (clamd must be started by root).
# Default: disabled
#User clamav
# Initialize supplementary group access (clamd must be started by root).
# Default: disabled
#AllowSupplementaryGroups
# Stop daemon when libclamav reports out of memory condition.
#ExitOnOOM
# Don't fork into background.
# Default: disabled
#Foreground
# Enable debug messages in libclamav.
# Default: disabled
#Debug
# Do not remove temporary files (for debug purposes).
# Default: disabled
#LeaveTemporaryFiles
# By default clamd uses scan options recommended by libclamav. This option
# disables recommended options and allows you to enable selected ones below.
# DO NOT TOUCH IT unless you know what you are doing.
# Default: disabled
#DisableDefaultScanOptions
##
## Executable files
##
# PE stands for Portable Executable - it's an executable file format used
# in all 32-bit versions of Windows operating systems. This option allows
# ClamAV to perform a deeper analysis of executable files and it's also
# required for decompression of popular executable packers such as UPX, FSG,
# and Petite.
# Default: enabled
#ScanPE
# With this option clamav will try to detect broken executables and mark
# them as Broken.Executable
# Default: disabled
#DetectBrokenExecutables
##
## Documents
##
# This option enables scanning of Microsoft Office document macros.
# Default: enabled
#ScanOLE2
##
## Mail files
##
# Enable internal e-mail scanner.
# Default: enabled
ScanMail
# If an email contains URLs ClamAV can download and scan them.
# WARNING: This option may open your system to a DoS attack.
# Never use it on loaded servers.
# Default: disabled
#MailFollowURLs
##
## HTML
##
# Perform HTML normalisation and decryption of MS Script Encoder code.
# Default: enabled
#ScanHTML
##
## Archives
##
# ClamAV can scan within archives and compressed files.
# Default: enabled
#ScanArchive
# Due to license issues libclamav does not support RAR 3.0 archives (only the
# old 2.0 format is supported). Because some users report stability problems
# with unrarlib it's disabled by default and you must uncomment the directive
# below to enable RAR 2.0 support.
# Default: disabled
#ScanRAR
# The options below protect your system against Denial of Service attacks
# using archive bombs.
# Files in archives larger than this limit won't be scanned.
# Value of 0 disables the limit.
# Default: 10M
#ArchiveMaxFileSize 15M
# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
# file, all files within it will also be scanned. This options specifies how
# deep the process should be continued.
# Value of 0 disables the limit.
# Default: 8
#ArchiveMaxRecursion 9
# Number of files to be scanned within an archive.
# Value of 0 disables the limit.
# Default: 1000
#ArchiveMaxFiles 1500
# If a file in an archive is compressed more than ArchiveMaxCompressionRatio
# times it will be marked as a virus (Oversized.ArchiveType, e.g. Oversized.Zip)
# Value of 0 disables the limit.
# Default: 250
#ArchiveMaxCompressionRatio 300
# Use slower but memory efficient decompression algorithm.
# only affects the bzip2 decompressor.
# Default: disabled
#ArchiveLimitMemoryUsage
# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
# Default: disabled
#ArchiveBlockEncrypted
# Mark archives as viruses (e.g. RAR.ExceededFileSize, Zip.ExceededFilesLimit)
# if ArchiveMaxFiles, ArchiveMaxFileSize, or ArchiveMaxRecursion limit is
# reached.
# Default: disabled
#ArchiveBlockMax
##
## Clamuko settings
## WARNING: This is experimental software. It is very likely it will hang
## up your system!!!
##
# Enable Clamuko. Dazuko (/dev/dazuko) must be configured and running.
# Default: disabled
#ClamukoScanOnAccess
# Set access mask for Clamuko.
# Default: disabled
#ClamukoScanOnOpen
#ClamukoScanOnClose
#ClamukoScanOnExec
# Set the include paths (all files in them will be scanned). You can have
# multiple ClamukoIncludePath directives but each directory must be added
# in a seperate line.
# Default: disabled
#ClamukoIncludePath /home
#ClamukoIncludePath /students
# Set the exclude paths. All subdirectories are also excluded.
# Default: disabled
#ClamukoExcludePath /home/guru
# Don't scan files larger than ClamukoMaxFileSize
# Value of 0 disables the limit.
# Default: 5M
#ClamukoMaxFileSize 10M
[root@asterix ~]# cat /etc/freshclam.conf | more
##
## Example config file for freshclam
## Please read the freshclam.conf(5) manual before editing this file.
## This file may be optionally merged with clamd.conf.
##
# Comment or remove the line below.
#Example
# Path to the database directory.
# WARNING: It must match clamd.conf's directive!
# Default: hardcoded (depends on installation options)
#DatabaseDirectory /var/lib/clamav
# Path to the log file (make sure it has proper permissions)
# Default: disabled
#UpdateLogFile /var/log/freshclam.log
# Enable verbose logging.
# Default: disabled
#LogVerbose
# Use system logger (can work together with UpdateLogFile).
# Default: disabled
#LogSyslog
# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL
# This option allows you to save the process identifier of the daemon
# Default: disabled
#PidFile /var/run/freshclam.pid
# By default when started freshclam drops privileges and switches to the
# "clamav" user. This directive allows you to change the database owner.
# Default: clamav (may depend on installation options)
#DatabaseOwner clamav
# Initialize supplementary group access (freshclam must be started by root).
# Default: disabled
#AllowSupplementaryGroups
# Use DNS to verify virus database version. Freshclam uses DNS TXT records
# to verify database and software versions. With this directive you can change
# the database verification domain.
# Default: enabled, pointing to current.cvd.clamav.net
#DNSDatabaseInfo current.cvd.clamav.net
# Uncomment the following line and replace XY with your country
# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
# Default: There is no default, which results in an error when running freshclam
#DatabaseMirror db.XY.clamav.net
# database.clamav.net is a round-robin record which points to our most
# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is
# not working. DO NOT TOUCH the following line unless you know what you
# are doing.
DatabaseMirror database.clamav.net
# How many attempts to make before giving up.
# Default: 3 (per mirror)
#MaxAttempts 5
# Number of database checks per day.
# Default: 12 (every two hours)
#Checks 24
# Proxy settings
# Default: disabled
#HTTPProxyServer myproxy.com
#HTTPProxyPort 1234
#HTTPProxyUsername myusername
#HTTPProxyPassword mypass
# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
# multi-homed systems.
# Default: Use OS'es default outgoing IP address.
#LocalIPAddress aaa.bbb.ccc.ddd
# Send the RELOAD command to clamd.
# Default: disabled
#NotifyClamd
# By default it uses the hardcoded configuration file but you can force an
# another one.
#NotifyClamd /config/file/path
# Run command after successful database update.
# Default: disabled
#OnUpdateExecute command
# Run command when database update process fails.
# Default: disabled
#OnErrorExecute command
# Run command when freshclam reports outdated version.
# In the command string %v will be replaced by the new version number.
# Default: disabled
#OnOutdatedExecute command
# Don't fork into background.
# Default: disabled
#Foreground
# Enable debug messages in libclamav.
# Default: disabled
#Debug
Quote
