Bamieater
02/05/08, 12:10
Laatst heb ik een IDE disk vervangen, maar volgens mij wordt deze nieuwe disk niet gesynchroniseerd met de bestaande disk. Daarnaast branden de status lampjes niet meer zoals ze voorheen deden. De disk zelf vertoond ook helemaal geen activiteit o.i.d.
Dan nu mijn vraag; hoe kan ik de RAID array beheren en zorgen dat de HDD's weer gesynchroniseerd worden? Is er iemand bekend met deze server?
We draaien FreeBSD 6.2 op de server. De specificaties zijn hier te vinden: http://servelinux.btnet.de/Sapphire_L3_detail.asp
dmesg.boot:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #0: Tue Apr 17 12:44:41 CEST 2007
root@freenode.sono:/usr/obj/usr/src/sys/FREENODE
ACPI APIC Table: <AMIINT >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (999.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1073676288 (1023 MB)
avail memory = 1041678336 (993 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <AMIINT > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 7.4 (no driver attached)
pci0: <display, VGA> at device 8.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xdff6d000-0xdff6dfff,0xdfe00000-0xdfefffff irq 16 at device 9.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:03:a8:01:0e:ae
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xdff6c000-0xdff6cfff,0xdfc00000-0xdfcfffff irq 17 at device 10.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:03:a8:03:0e:ae
sym0: <875> port 0xd800-0xd8ff mem 0xdff6ff00-0xdff6ffff,0xdff6e000-0xdff6efff irq 18 at device 11.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: [GIANT-LOCKED]
acpi_button1: <Sleep Button> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcefff,0xcf000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 999669521 Hz quality 800
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
IP Filter: v4.1.13 initialized. Default = block all, Logging = enabled
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <SR243T/L02J> at ata0-master UDMA33
da0 at sym0 bus 0 target 0 lun 0
da0: <ACARD MirrorSmart 38G 2.6I> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 39205MB (80293247 512 byte sectors: 255H 63S/T 4998C)
Dan nu mijn vraag; hoe kan ik de RAID array beheren en zorgen dat de HDD's weer gesynchroniseerd worden? Is er iemand bekend met deze server?
We draaien FreeBSD 6.2 op de server. De specificaties zijn hier te vinden: http://servelinux.btnet.de/Sapphire_L3_detail.asp
dmesg.boot:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #0: Tue Apr 17 12:44:41 CEST 2007
root@freenode.sono:/usr/obj/usr/src/sys/FREENODE
ACPI APIC Table: <AMIINT >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (999.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1073676288 (1023 MB)
avail memory = 1041678336 (993 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <AMIINT > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 7.4 (no driver attached)
pci0: <display, VGA> at device 8.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xdff6d000-0xdff6dfff,0xdfe00000-0xdfefffff irq 16 at device 9.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:03:a8:01:0e:ae
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xdff6c000-0xdff6cfff,0xdfc00000-0xdfcfffff irq 17 at device 10.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:03:a8:03:0e:ae
sym0: <875> port 0xd800-0xd8ff mem 0xdff6ff00-0xdff6ffff,0xdff6e000-0xdff6efff irq 18 at device 11.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: [GIANT-LOCKED]
acpi_button1: <Sleep Button> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcefff,0xcf000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 999669521 Hz quality 800
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
IP Filter: v4.1.13 initialized. Default = block all, Logging = enabled
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <SR243T/L02J> at ata0-master UDMA33
da0 at sym0 bus 0 target 0 lun 0
da0: <ACARD MirrorSmart 38G 2.6I> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 39205MB (80293247 512 byte sectors: 255H 63S/T 4998C)