Wegens overbodig:
Nokia IP290 firewall:
- 6x gbit ethernet interfaces
- IPSO 6.2 software, ergens nog wat Checkpoint packages liggen geloof ik
- Inclusief 19" rackmount kit
€50,- of een goed ander bod.
Bootlog:
Oct 15 19:41:32 DPFW01 <user.[LOG_CRIT]> rebo rebooted by admin
Oct 15 19:41:32 DPFW01 <user.[LOG_CRIT]> rebo rebooted by admin
Oct 15 19:41:32 DPFW01 <syslog.[LOG_ERR]> syslogd: exiting on signal 15
Oct 15 19:41:32 DPFW01 <syslog.[LOG_ERR]> syslogd: exiting on signal 15
Oct 15 19:41:32 pm[463]: Reaped: sshd[1025]
Oct 15 19:41:32 pm[463]: Scheduled sshd for +1 secs
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 0 0 0 done
All buffers synced.
Uptime: 10m26s
Rebooting...
CPU Microcode Revision: 20h
CPUID: 6D8h
BIOS version: 8005
BIOS build date: 07/24/2007
100% of the system memory tested OK
Press ESC key twice to skip memory test
1,072,300,032 bytes of system memory tested OK
Uncompressing ... done
Loading boot manager..
Boot manager loaded.
Entering autoboot mode.
Type any character to enter command mode.
Booting /dev/ad0s4f:/image/IPSO-6.2-GA083-01.18.2013-022805-1/kernel
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
releng 1 01.18.2013-022805Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor 1.50GHz (1496.26-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,AC PI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 1072201728 (1022 MB)
avail memory = 1037144064 (989 MB)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <PCI-PCI bridge> irq 11 at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> irq 11 at device 4.0 on pci0
pci2: <PCI bus> on pcib2
wx0: <Intel(R) 82571EI 10/100/1000 NIC> port 0x4020-0x403f mem 0x80200000-0x8021ffff,0x80220000-0x8023ffff irq 5 at device 0.0 on pci2
wx0: slot=-1, subslot=-1, port=1
wx0: operates as eth1
wx1: <Intel(R) 82571EI 10/100/1000 NIC> port 0x4000-0x401f mem 0x80240000-0x8025ffff,0x80260000-0x8027ffff irq 6 at device 0.1 on pci2
wx1: slot=-1, subslot=-1, port=2
wx1: operates as eth2
pcib3: <PCI-PCI bridge> irq 11 at device 5.0 on pci0
pci3: <PCI bus> on pcib3
wx2: <Intel(R) 82571EI 10/100/1000 NIC> port 0x3020-0x303f mem 0x80100000-0x8011ffff,0x80120000-0x8013ffff irq 5 at device 0.0 on pci3
wx2: slot=-1, subslot=-1, port=3
wx2: operates as eth3
wx3: <Intel(R) 82571EI 10/100/1000 NIC> port 0x3000-0x301f mem 0x80140000-0x8015ffff,0x80160000-0x8017ffff irq 6 at device 0.1 on pci3
wx3: slot=-1, subslot=-1, port=4
wx3: operates as eth4
pcib4: <PCI-PCI bridge> irq 11 at device 6.0 on pci0
pci4: <PCI bus> on pcib4
wx4: <Intel(R) 82571EI 10/100/1000 NIC> port 0x2020-0x203f mem 0x80000000-0x8001ffff,0x80020000-0x8003ffff irq 5 at device 0.0 on pci4
wx4: slot=-1, subslot=-1, port=5
wx4: operates as eth5
wx5: <Intel(R) 82571EI 10/100/1000 NIC> port 0x2000-0x201f mem 0x80040000-0x8005ffff,0x80060000-0x8007ffff irq 6 at device 0.1 on pci4
wx5: slot=-1, subslot=-1, port=6
wx5: operates as eth6
pcib5: <PCI-PCI bridge> at device 28.0 on pci0
pci5: <PCI bus> on pcib5
uhci0: <Intel 6300ESB USB controller USB-A> port 0x5040-0x505f irq 5 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 6300ESB USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
ehci0: <Intel 6300ESB USB 2.0 controller> mem 0x80301400-0x803017ff irq 12 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb1: waiting for BIOS to give up control
usb1: timed out waiting for BIOS
usb1: EHCI version 1.0
usb1: wrong number of companions (2 != 1)
usb1: companion controller, 2 ports each: usb0
usb1: <Intel 6300ESB USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pcib6: <PCI-PCI bridge> at device 30.0 on pci0
pci6: <PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5070-0x507f mem 0x80301000-0x803013ff at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel 6300ESB SATA150 controller> port 0x5088-0x508f,0x50a4-0x50a7,0x5080-0x5087,0x50a0-0x50a3,0x5060-0x506f irq 15 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ichsmb0: <Intel 6300ESB (ICH) SMBus controller> port 0x5000-0x501f irq 6 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
System monitor irq 12
Timecounter "TSC" frequency 1496255423 Hz quality 800
Timecounters tick every 1.000 msec
IPSCTL_INIT
IPSCTL_DOMAIN_INIT
BFD: initialized.
ad0: 1953MB <STI Flash 8.0.0 01/17/07> at ata0-master WDMA2
ad0 serial number STI1M84308092122619
a26s0 at 0x2c on smbus0
ADM1026 monitor 0 detected at 0x2c sc 0x64b89200 irq 12
hwpmc: TSC/1/0x20<REA> P6/2/0x1fe<USR,SYS,EDG,THR,REA,WRI,INV,QUA>
Changing mount root device to ufs:ad0s4f
Trying to mount root from ufs:ad0s4f
uncompressing root file-system ... Done
grep: /@sys/OPTIONAL_MOUNTS: No such file or directory
grep: /@sys/OPTIONAL_MOUNTS: No such file or directory
Loading configuration files.
kernel dumps on /dev/ad0s4b
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
/dev/ad0s4f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4f: clean, 176679 free (839 frags, 21980 blocks, 0.3% fragmentation)
/dev/ad0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4a: clean, 32046 free (30 frags, 4002 blocks, 0.1% fragmentation)
/dev/ad0s4h: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4h: clean, 357054 free (670 frags, 44548 blocks, 0.1% fragmentation)
Please choose the host name for this system. This name will be used
in messages and usually corresponds with one of the network hostnames
for the system. Note that only letters, numbers, dashes, and dots (.)
are permitted in a hostname.
Hostname?